Red Lion 红狮 CUB7P010 自动化与控制计时器与计数器计数器计数器-产品快照
- 品牌:
- Red Lion 红狮
- 型号:
- CUB7P010
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,cs11@gchane.com , QQ1429311537 |
产品介绍
Red Lion 红狮 CUB7P010 自动化与控制计时器与计数器计数器计数器
Red Lion Controls CUB7P010
Red Lion 红狮
Counter; CONTACT; GREEN BACKLIT 8-DIGIT Overview The CUB7P is an 8-digit miniature programmable counter with large 0.35 inch (8.90 mm) high digits. It has an LCD read-out available in Positive Image Reflective, Negative Image Transmissive with yellow/green backlighting, or red backlighting. Backlight units require an external 9 to 28 VDC power supply. The CUB7P is available in either Low Speed Contact or High Speed Logic. The Contact versions (CUB7P0xxx) operate from a switch contact or an NPN open collector transistor. The Logic versions (CUB7P2xx) operate from 3 VDC logic output or from an NPN open collector transistor. The CUB7P has a programmable prescaler that can be set for any value between 0.0001 and 1.9999. The decimal point position can be set anywhere from 0 (no D.P.) to 0.000000 or no Leading Zero Blanking. Both the prescaler and DP selection are accessed using the front panel PGM and RESET push buttons. See Programming for details. Note that the count, prescaler and DP values will be lost if the battery is removed. The CUB7P counters use a CMOS LSI chip, mounted on a gold-plated substrate, that is electrically connected by ultrasonic wire-bonding. Proven micro-electronic assembly and manufacturing techniques provide these units with the reliability and dependability required for industrial service. The CUB7P series is housed in a lightweight, high impact plastic case with a clear viewing window. The sealed front panel with the silicone rubber buttons meets NEMA 4X/IP65 specifications for wash-down and/or dusty environments, when properly installed.
Application : Industrial Approvals : EN 61010-1, IEC 529, IEC 61010-1, IP65, Type 4X Indoor Backlighting : Backlight Bezel : NEMA 4X⁄IP65 Sealed Front Panel Brand Family : CUB Brand/Series : CUB 7P Series Connection Type : Screw-Terminal Counter Type : Miniature Electronic Cut Out, Panel : 1.77×0.874 " Depth : 0.157" (4mm) Dimensions, Cutout, Inches : 45 x 22.2 mm mm Display Digit Height : 8.9 mm mm Display Type : Digital, LCD Function : Counter Input Type : Contact Measuring Range : 0.0001 to 1.9999 Mounting Type : Panel Mount Number of Digits : 8 Digits Operating Temperature, Maximum : 50 °C Operating Temperature, Minimum : 0 °C Primary Type : Electronic Supply Voltage : 9 to 28 VDC VDC Temperature Range : 0 to +50 °C °C Temperature, Opening, Maximum : 50 °C °C Temperature, Operating, Minimum : 0 °C °C Type : Electronic
Automation & Control Timers & Counters Counters Counters