opto22奥普图 SNAP-TEX-MR10-16C-产品快照
- 品牌:
- opto22奥普图
- 型号:
- SNAP-TEX-MR10-16C
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
深圳市格雷创科技有限公司 | 400-811-6961 | 微信及邮件咨询,官网:www.gchane.com |
产品介绍
opto22奥普图 SNAP-TEX-MR10-16C
opto22/奥普图 SNAP-TEX-MR10-16C
opto22奥普图
16-Point Breakout Board with Mechanical Relays and Header Connector, for High-Density Digital Output Modules ; The SNAP-TEX-MR10-16C breakout board is designed for high-current switching of outputs through SNAP high-density digital (HDD) output modules. The board includes 16 mechanical relays, one for each point, that can switch up to 10 A per point. (Without the breakout board, SNAP HDD output modules can switch a maximum of 0.75 A per point.) The SNAP-TEX-MR10-16C includes on/off indicators for each point, and each point can be wired for normally closed or normally open. The board requires 24 VDC power. A header connector allows two MR10-16C breakout boards to connect to one SNAP-ODC-32-SRC 32-point digital output module using a SNAP-HD-G4F6 cable. The advantage of using this breakout board and cable with the module is that you do not have to wire them; simply snap the cable onto the top of the module and then plug the other two cable ends into the header connectors on the two boards. NOTE: A replacement relay, the SNAP-MR10 , is available. Build your system in the SNAP I/O Configurator .
Feature SNAP-TEX-MR10-16C Use with I/O modules SNAP-ODC5-i, SNAP-ODC5A-i, SNAP-ODC5SRC, SNAP-ODC-32-SRC Use with cables • For one high-density SNAP-ODC-32-SRC module, use a SNAP-HD-G4F6 cable to connect two breakout boards to one module. • For four 4-point modules, use SNAP-TEX-CBO6 (odd pins bussed) or SNAP-TEX-CBS6 (no bussing), depending on module. Use with jumper straps STRAP2Q, STRAP4Q Relay contacts SPDT (1 Form C) Typical life expectancy (Electrical): 1 x 10 5 Switching capacity 10 A @ 250 VAC Switch On time 7 ms nominal Switch Off time 3 ms nominal Fusing 24 V fuse for board. Opto 22 p/n SNAP-FUSE1AC Indicators 16 On/Off status indicators (one for each channel) 1 fuse-blown indicator Power requirements (all positions On) 24 VDC @ 300 mA Agency Approvals UL, CE, RoHS, DFARS Warranty 30 months from date of manufacture
Opto 22 Home Products All Products Product Selector Accessories Breakout Boards SNAP TEX Mechanical relays