opto22奥普图 SNAP-PAC-RCK12-产品快照
- 品牌:
- opto22奥普图
- 型号:
- SNAP-PAC-RCK12
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
深圳市格雷创科技有限公司 | 400-811-6961 | 微信及邮件咨询,官网:www.gchane.com |
产品介绍
opto22奥普图 SNAP-PAC-RCK12
opto22/奥普图 SNAP-PAC-RCK12
opto22奥普图
SNAP PAC 12-Module Mounting Rack ; The SNAP-PAC-RCK12 mounts one SNAP PAC brain or on-the-rack controller and up to 12 analog, digital, serial, and special-purpose SNAP I/O modules. The SNAP-PAC-RCK12 can be DIN-rail or panel mounted. This rack works with all SNAP I/O modules on the Opto 22 website. Analog, digital, and serial modules can be mixed on the rack and placed in any position. (Some serial modules are limited to a maximum of eight on one rack. See module data sheets for limitations and power requirements.) Together with I/O modules and a brain or rack-mounted controller, this rack forms an I/O unit that provides distributed control in a SNAP PAC System. The I/O unit can also be used for PC-based control or as intelligent remote I/O for an Allen-Bradley MicroLogix PLC or other RSLogix-based system, such as ControlLogix or CompactLogix. If you need Factory Mutual approval, see the SNAP-PAC-RCK12-FM instead. Need an enclosure with this rack? See the SNAP-IT-PM12 which includes an I/O mounting rack and a power supply, already wired. You add the I/O processor and the SNAP input and output (I/O) modules needed for your application. This panel-mounted metal enclosure makes it easy to install Opto 22 I/O where you need it, providing convenience and protection for your SNAP PAC System. Learn more about the SNAP-IT-PM12. Other SNAP PAC racks available: SNAP-PAC-RCK4 for 4 modules SNAP-PAC-RCK8 for 8 modules SNAP-PAC-RCK16 for 16 modules NOTE: This rack replaces part number SNAP-M48. All brains that mount on a SNAP-M48 can also be mounted on this rack. Build your system in the SNAP I/O Configurator .
Power 1 Requirements 5.0 to 5.2 VDC @ 4.2 Amps max I/O Processor 2 Compatibility SNAP-PAC-R1 SNAP-PAC-R2 SNAP-PAC-EB1 SNAP-PAC-EB2 SNAP-PAC-R1-W SNAP-PAC-R2-W SNAP-PAC-EB1-W SNAP-PAC-EB2-W SNAP-PAC-R1-FM SNAP-PAC-R2-FM SNAP-PAC-EB1-FM SNAP-PAC-EB2-FM Replacement Fuse SNAP-FUSE7.5AB or Littelfuse 297 07.5 Rack Power Terminals Wire Size 22 to 14 AWG Operating Temperature –20 to 70 °C Storage Temperature –40 to 85 °C Relative Humidity 95%, non-condensing Agency Approvals Non -FM models: UL, CE, RoHS, DFARS -FM models: FM, CE, ATEX, RoHS, DFARS Warranty 30 months from date of manufacture 1 Power requirements shown are for a rack, a processor, and a full load of analog modules. Power requirements for SNAP serial and high-density modules are higher. See module data sheets. 2 “I/O Processor” means a SNAP PAC brain or SNAP PAC on-the-rack controller. For compatibility with legacy Opto 22 products, see form #1693, Legacy and Current Product Comparison and Compatibility Charts .
Opto 22 Home Products All Products Product Selector I/O Module Racks SNAP I/O SNAP Brain Compatible