供应商名称 | 电话 | 备注 |
---|---|---|
深圳市格雷创科技有限公司 | 400-811-6961 | 微信及邮件咨询,官网:www.gchane.com |
产品介绍
opto22奥普图 LC4A
opto22/奥普图 LC4A
opto22奥普图
OBSOLETE LC4-family Single-board Controller, 120 VAC ; This part is obsolete and no longer available. Please contact Opto 22 Pre-Sales engineers to discuss options for your specific application. ------------------------ The LC4 family of controllers provides powerful, low-cost, single-board computers which function as local controllers on a Pamux or Optomux network. The LC4A controller uses onboard 120 AC power. For 220 VAC power, use the LC4B controller. Also available is the LC4DC controller, which requires a 10-28 VDC power source.
Power Requirements: LC4A LC4B LC4DC 115 VAC ± 10 VAC, 60 Hz 220 VAC ± 20 VAC, 50 Hz 10 - 28 VDC, 1.5 amperes @ 10 VDC, 0.50 amperes @ 24 VDC Power Dissipation: less than 8 watts @ 25 °C Operating Temperature: 0 to 70 °C 95% relative humidity, non-condensing Interface: one full duplex, RS-422/485 serial port one full duplex, selectable RS-232 or RS-422/485 port one expansion bus for daughter card Baud Rate: 300 to 38,400 baud Distance: RS-422/485 RS-232 up to 5,000 feet total length up to 100 multidrop stations up to 50 feet CPU: 64180, 8-bit microprocessor CPU Clock Frequency: 6.144 MHz EPROM: 32K bytes RAM: 64K CMOS with battery backup (32K for the application program and 32K for a RAM disk) Real-Time Clock: clock/calendar with battery backup, 0.01 second resolution (Interrupt) RAM/Clock Battery: 3 volt lithium, over 10 year life Indicators: power, host transmit and receive, and Optomux transmit and receive Jumper Options: auto run baud rates LC4 address termination and biasing resistors
Opto 22 Home Products All Products Product Selector Controllers Basic, Forth Standalone LC Controller