opto22奥普图 SNAP-PAC-RCK8-FM-产品快照
- 品牌:
- opto22奥普图
- 型号:
- SNAP-PAC-RCK8-FM
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 深圳市格雷创科技有限公司 | 400-811-6961 | 微信及邮件咨询,官网：www.gchane.com |
产品介绍
opto22奥普图 SNAP-PAC-RCK8-FM
opto22/奥普图 SNAP-PAC-RCK8-FM
opto22奥普图
SNAP PAC 8-Module Mounting Rack, Factory Mutual Approved ; The SNAP-PAC-RCK8-FM mounts one SNAP PAC brain or on-the-rack controller and up to 8 analog, digital, serial, and special-purpose SNAP I/O modules. The SNAP-PAC-RCK8-FM can be DIN-rail or panel mounted. This rack works with all SNAP I/O modules on the Opto 22 website. Analog, digital, and serial modules can be mixed on the rack and placed in any position. (Some serial modules are limited to a maximum of eight on one rack. See module data sheets for limitations and power requirements.) Together with I/O modules and a brain or rack-mounted controller, this rack forms an I/O unit that provides distributed control in a SNAP PAC System. The I/O unit can also be used for PC-based control or as intelligent remote I/O for an Allen-Bradley MicroLogix PLC or other RSLogix-based system, such as ControlLogix or CompactLogix. The SNAP-PAC-RCK8-FM is Factory Mutual approved. If you don't need FM approval, see the SNAP-PAC-RCK8. Other SNAP PAC racks available: SNAP-PAC-RCK4-FM for 4 modules SNAP-PAC-RCK12-FM for 12 modules SNAP-PAC-RCK16-FM for 16 modules Build your system in the SNAP I/O Configurator .
Power 1 Requirements 5.0 to 5.2 VDC @ 4.2 Amps max I/O Processor 2 Compatibility SNAP-PAC-R1 SNAP-PAC-R2 SNAP-PAC-EB1 SNAP-PAC-EB2 SNAP-PAC-R1-W SNAP-PAC-R2-W SNAP-PAC-EB1-W SNAP-PAC-EB2-W SNAP-PAC-R1-FM SNAP-PAC-R2-FM SNAP-PAC-EB1-FM SNAP-PAC-EB2-FM Replacement Fuse SNAP-FUSE7.5AB or Littelfuse 297 07.5 Rack Power Terminals Wire Size 22 to 14 AWG Operating Temperature –20 to 70 °C Storage Temperature –40 to 85 °C Relative Humidity 95%, non-condensing Agency Approvals Non -FM models: UL, CE, RoHS, DFARS -FM models: FM, CE, ATEX, RoHS, DFARS Warranty 30 months from date of manufacture 1 Power requirements shown are for a rack, a processor, and a full load of analog modules. Power requirements for SNAP serial and high-density modules are higher. See module data sheets. 2 “I/O Processor” means a SNAP PAC brain or SNAP PAC on-the-rack controller. For compatibility with legacy Opto 22 products, see form #1693, Legacy and Current Product Comparison and Compatibility Charts .
Opto 22 Home Products All Products Product Selector I/O Module Racks SNAP I/O SNAP Brain Compatible
更多产品:
更多品牌:
