BECKHOFF倍福 BKH-BX9000 I / O系统现场总线控制器-产品快照
- 品牌:
- BECKHOFF倍福
- 型号:
- BKH-BX9000
- 重量:
- 0.255 kg
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 毕孚自动化设备贸易（上海）有限公司 | 4008207388 | |
| 广州永邦机电科技有限公司 | 020-38480341 | |
| 深圳市丰德锐科技有限公司 | 0755-82526060 |
产品介绍
BECKHOFF倍福 BKH-BX9000 I / O系统现场总线控制器
BX9000 Bus terminal Controller 256-KB ETHERNET-TCP/IP
BECKHOFF倍福
Beckhoff BX9000 Bus Terminal Bus Terminal Controller Bus Terminal Controller with integrated IEC 61131-3 PLC, Program memory: 256KB, Data memory: 256KB, Remanent data: 2KB, Ethernet TCP/IP interface, Ethernet protocols TwinCAT ADS, MODBUS TCP General Description The BX9000 Bus Terminal Controller has an Ethernet slave/master interface. The controller has automatic baud rate detection up to 100 Mbaud. The address can optionally be entered via DHCP, BootP, ARP or with the joystick switch. Up to 2 kbytes of input and 2 kbytes of output can be exchanged with the controller. The MODBUSTCP and the ADS/TCP and ADS/UDP protocols are implemented. One unit consists of the BX9000 Bus Terminal Controller with up to 64 Bus Terminals and a bus end terminal. With the terminal bus extension system, the connection of up to 255 Bus Terminals is possible. The controller is programmed via the COM1 or via the Ethernet interface. In terms of their equipment and performance, the BX series Bus Terminal Controllers are positioned between the BC series Bus Terminal Controllers and the CX series Embedded PCs. The main features distinguishing BC and BX are the larger memory and the expanded interfaces of the BX. Additionally, two serial interfaces are integrated for programming and for the connection of further serial devices. The device itself comprises an illuminated LC display with two lines of 16 characters each, a joystick switch and a real-time clock. Further peripheral devices, e.g. displays, can be connected via the integrated Beckhoff Smart System Bus (SSB). Controller for distributed signal processing Like for all other Beckhoff controllers, the TwinCAT automation software is the basis for parameterisation and programming. The BX devices are programmed according to the powerful IEC 61131-3 standard in the programming languages IL, FBD, LD, SFC or ST. Users therefore have the familiar TwinCAT tools available, e.g. the PLC programming interface, the System Manager and TwinCAT Scope. Data is exchanged optionally via the serial port (COM1) or via the Ethernet interface. The configuration is also carried out using TwinCAT. The fieldbus interface, the SSB bus and the real-time clock can be configured and parameterised via the System Manager. The System Manager can read all connected devices and Bus Terminals. After the parameterisation, the configuration is saved on the BX via the serial interface and can be accessed again later.
I/O Systems Fieldbus Controller
更多产品:
更多品牌:
