Phoenix Contact菲尼克斯 MACX MCR-EX-SL-RPSSI-I-UP-SP 交流稳压电源-产品快照

产品介绍

Phoenix Contact菲尼克斯 MACX MCR-EX-SL-RPSSI-I-UP-SP 交流稳压电源

MACX MCR-EX-SL-RPSSI-I-UP-SP 2924029 PHOENIX CONTACT Ex-i repeater power supply and input isolating amplifie..

PHOENIX_CONTACT

Ex-i repeater power supply and input isolating amplifier, HART Sends fed or active 0/4-20 mA signals from the Ex area to a load (active or passive) to the safe area. Electrical 3-way isolation; SIL 2, wide range power supply.

Dimensions Width 17.5 mm Height 99 mm Depth 114.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C (Any mounting position) Ambient temperature (storage/transport) -40 °C ... 80 °C Maximum altitude ≤ 2000 m Permissible humidity (operation) 10 % ... 95 % (non-condensing) Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Degree of protection IP20 Input data Signal input Active current input, intrinsically safe Current input signal 4 mA ... 20 mA Transmitter supply voltage > 16 V (20 mA) > 15.3 V (22.5 mA) Signal input Passive current input, intrinsically safe Current input signal 0 mA ... 20 mA 4 mA ... 20 mA Voltage drop < 3.5 V Output data Signal output Current output Voltage output signal 1 V ... 5 V (internal resistance, 250 Ω, 0.1%) Current output signal 4 mA ... 20 mA (active) 4 mA ... 20 mA (14 ... 26 V ext. source voltage) Transmission Behavior 1:1 to input signal Load/output load current output < 600 Ω (20 mA) < 525 Ω (22.5 mA) Output ripple < 20 mV rms Output behavior in the event of an error 0 mA (Cable break in the input) ≥ 22.5 mA (Cable short-circuit in the input) Signal output Current output (active and passive) Voltage output signal 0 V ... 5 V (internal resistance, 250 Ω, 0.1%) Current output signal 0 mA ... 20 mA (active) 4 mA ... 20 mA (active) 0 mA ... 20 mA (14 ... 26 V ext. source voltage) 4 mA ... 20 mA (14 ... 26 V ext. source voltage) Load/output load current output < 600 Ω (20 mA) < 525 Ω (22.5 mA) Output ripple < 20 mV rms Output behavior in the event of an error 0 mA (Cable break in the input) 0 mA (Cable short-circuit in the input) Power supply Designation Repeater power supply operation Supply voltage range 24 V ... 230 V AC/DC (-20 %/+10 %, 50/60 Hz) Max. current consumption < 80 mA (24 V DC / 20 mA) Power consumption < 1.6 W (24 V DC/ 20 mA) Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Stripping length 8 mm Connection method Push-in connection General No. of channels 1 Maximum transmission error < 0.1 % (of final value) Transmission error, typical < 0.05 % (of final value) Maximum temperature coefficient < 0.01 %/K Step response (10-90%) < 600 µs (for 4 mA ... 20 mA step) Status display Green LED (supply voltage) Flammability rating according to UL 94 V0 Pollution degree 2 Overvoltage category II Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Emitted interference EN 61000-6-4 Housing material PA 66-FR Color green Designation Input/output/power supply Electrical isolation 300 V rms (Rated insulation voltage (overvoltage category II; pollution degree 2, safe isolation as per EN 61010-1)) 2.5 kV (50 Hz, 1 min., test voltage) Designation Input/output Electrical isolation 375 V (Peak value in accordance with EN 60079-11) Designation Input/power supply Electrical isolation 375 V (Peak value in accordance with EN 60079-11) Conformance CE-compliant, additionally EN 61326 ATEX Ex II (1) G [Ex ia Ga] IIC/IIB Ex II (1) D [Ex ia Da] IIIC Ex II 3(1) G Ex nA [ia Ga] IIC/IIB T4 Gc IECEx [Ex ia Ga] IIC/IIB [Ex ia Da] IIIC Ex nA [ia Ga] IIC/IIB T4 Gc UL, USA / Canada Class I Div 2; IS for Class I, II, III Div 1 Functional Safety (SIL) SIL 2 Data communication (bypass) HART function Yes Protocols supported HART Safety data Operation Repeater power supply operation Max. output voltage U o 25.2 V Max. output current I o 93 mA Max. output power P o 587 mW Group IIC Max. external inductivity L o 2 mH Max. external capacity C o 107 nF Group IIB Max. external inductivity L o 4 mH Max. external capacity C o 820 nF Safety-related maximum voltage U m 253 V AC/DC (Supply terminals) Operation Signal conditioner operation Input voltage U i ≤ 30 V Input current I i ≤ 150 mA Max. internal inductance L i negligible Max. internal capacitance C i negligible EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 1 % Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 1 % Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 1 %

Categories: Programmable Logic Controllers Plcs INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT MSR Components for Ex areas - PHOENIX CONTACT