Phoenix Contact菲尼克斯 MINI MCR-SL-RPSS-I-I 交流稳压电源-产品快照
- 品牌:
- Phoenix Contact
- 型号:
- MINI MCR-SL-RPSS-I-I
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
菲尼克斯(中国)投资有限公司 | 025-52121888 | |
西连电气(上海)有限公司 | 021-80181890 | 工业连接器供应商 |
上海积进自动化设备有限公司 | 021-34273201 | |
上海北上自动化设备有限公司 | 400 7720 262 | |
南京瀚德电子科技有限公司 | 025-86368030 | 电气连接解决方案 |
工控网(北京)电子商务有限公司 | 400-102-5068 | |
上海贸泽电子有限公司 | ||
欧时电子元件(上海)有限公司 | ||
深圳市仕达威实业有限公司 | 400-800-8619 | 德国工业品一站式采购 |
众业达电气股份有限公司 | 4008018988 | |
福州福大自动化科技有限公司 | 0591-28482265 | |
北京京北通宇电子元件有限公司 | 010-82743622 | 国际电子元器件采购服务 |
产品介绍
Phoenix Contact菲尼克斯 MINI MCR-SL-RPSS-I-I 交流稳压电源
MINI MCR-SL-RPSS-I-I 2864079 PHOENIX CONTACT MCR repeater power supply with HART transmission, input signal ..
PHOENIX_CONTACT
MCR repeater power supply with HART transmission, input signal 4...20 mA, output signal 4...20 mA, with screw connection.
Product description The 6.2 mm wide MINI MCR-SL-RPSS-I-I... repeater power supply supplies the transmitter in the field in case of simultaneous galvanic 3-way separation between input, output and supply. HART data protocols can be transmitted bidirectionally. The module can be used in both isolator and repeater power supply operation. On the input and output side, the analog standard signals 0...20 mA or 4...20 mA are available, electrically isolated. Voltage (20.4 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector. Dimensions Width 6.2 mm Height 93.1 mm Depth 102.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection IP20 Input data Description of the input Current input (sensor circuit) Number of inputs 1 Current input signal 4 mA ... 20 mA (repeater power supply and isolator operation) 0 mA ... 20 mA (isolator operation) Max. input current 28 mA Input resistance current input approx. 50 Ω Transmitter supply voltage 16.5 V Output data Output name Current output Number of outputs 1 Current output signal 4 mA ... 20 mA (repeater power supply and isolator operation) 0 mA ... 20 mA (isolator operation) Max. output current > 21 mA (22.5 mA, typical) Load/output load current output ≤ 500 Ω (I = 20 mA) Transmission Behavior 1:1 to input signal Power supply Nominal supply voltage 24 V DC Supply voltage range 20.4 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) Power consumption < 900 mW (at 24 V DC and in repeater power supply operation) < 600 mW (at 24 V DC and in isolator operation) Connection data Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Stripping length 12 mm Screw thread M3 General No. of channels 1 Maximum transmission error ≤ 0.2 % (of final value) Transmission error, typical ≤ 0.1 % (of final value) Maximum temperature coefficient < 0.005 %/K Temperature coefficient, typical < 0.002 %/K Limit frequency (3 dB) 175 Hz (typ.) Step response (10-90%) < 2 ms (typ.) Protective circuit Transient protection Electrical isolation Basic insulation according to EN 61010 Overvoltage category II Pollution degree 2 Rated insulation voltage 50 V AC/DC Test voltage, input/output/supply 1.5 kV (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Color green Housing material PBT Mounting position any Assembly instructions To bridge the supply voltage, the DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used. It can be snapped onto a 35 mm DIN rail according to EN 60715. Conformance CE-compliant ATEX Ex II 3 G Ex nA IIC T4 Gc X UL, USA / Canada UL 508 Listed Class I, Div. 2, Groups A, B, C, D T4 Class I, Zone 2, Group IIC GL GL EMC 2 D Data communication (bypass) Limit frequency (3 dB) approx. 2.5 Hz EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 3 % Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 3 % Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 3 %
Categories: Converters INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT Modular Converter MCR technique. Analog - PHOENIX CONTACT