Phoenix Contact菲尼克斯 MINI MCR-SL-UI-UI-NC 放大器-产品快照
- 品牌:
- Phoenix Contact
- 型号:
- MINI MCR-SL-UI-UI-NC
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
菲尼克斯(中国)投资有限公司 | 025-52121888 | |
西连电气(上海)有限公司 | 021-80181890 | 工业连接器供应商 |
上海积进自动化设备有限公司 | 021-34273201 | |
上海北上自动化设备有限公司 | 400 7720 262 | |
南京瀚德电子科技有限公司 | 025-86368030 | 电气连接解决方案 |
工控网(北京)电子商务有限公司 | 400-102-5068 | |
上海贸泽电子有限公司 | ||
欧时电子元件(上海)有限公司 | ||
深圳市仕达威实业有限公司 | 400-800-8619 | 德国工业品一站式采购 |
众业达电气股份有限公司 | 4008018988 | |
福州福大自动化科技有限公司 | 0591-28482265 | |
北京京北通宇电子元件有限公司 | 010-82743622 | 国际电子元器件采购服务 |
产品介绍
Phoenix Contact菲尼克斯 MINI MCR-SL-UI-UI-NC 放大器
MINI MCR-SL-UI-UI-NC 2864150 PHOENIX CONTACT 3-way isolating amplifier for the electrical isolation of analo..
PHOENIX_CONTACT
3-way isolating amplifier for the electrical isolation of analog signals, I/O can be configured via DIP switches, with screw connection, standard configuration
Dimensions Width 6.2 mm Height 93.1 mm Depth 102.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 65 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection IP20 Input data Number of inputs 1 Configurable/programmable Yes, unconfigured Voltage input signal 0 V ... 10 V 0 V ... 5 V 1 V ... 5 V 2 V ... 10 V Current input signal 0 mA ... 20 mA 4 mA ... 20 mA Max. input voltage 30 V Max. input current 50 mA Input resistance of voltage input approx. 100 kΩ Input resistance current input approx. 50 Ω Output data Number of outputs 1 Configurable/programmable Yes, unconfigured Voltage output signal 0 V ... 10 V 0 V ... 5 V 1 V ... 5 V 2 V ... 10 V Current output signal 0 mA ... 20 mA (please indicate if different setting when ordering) 4 mA ... 20 mA Max. output voltage approx. 12.5 V Max. output current 28 mA Short-circuit current approx. 22 mA Load/output load voltage output ≥ 10 kΩ Load/output load current output < 500 Ω (at 20 mA) Power supply Nominal supply voltage 24 V DC Supply voltage range 19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) Max. current consumption < 19 mA (Current output, at 24 V DC incl. load) < 9 mA (Voltage output, at 24 V DC incl. load) Power consumption < 450 mW (Current output) < 200 mW (Voltage output) Connection data Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Stripping length 12 mm Screw thread M3 General No. of channels 1 Maximum transmission error ≤ 0.1 % (of final value) < 0.4 % (Without adjustment) Maximum temperature coefficient < 0.01 %/K Temperature coefficient, typical < 0.002 %/K Limit frequency (3 dB) approx. 100 Hz Step response (10-90%) approx. 3.2 ms Protective circuit Transient protection Electrical isolation Basic insulation according to EN 61010 Overvoltage category II Pollution degree 2 Rated insulation voltage 50 V AC/DC Test voltage, input/output/supply 1.5 kV (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Color green Housing material PBT Mounting position any Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. Conformance CE-compliant ATEX Ex II 3 G Ex nA IIC T4 Gc X UL, USA / Canada UL 508 Recognized Class I, Div. 2, Groups A, B, C, D T5 GL GL EMC 2 D EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 5 % Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 5 % Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 5 %
Categories: Overvoltage Protection Over Voltage INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT Modular Converter MCR technique. Analog - PHOENIX CONTACT