Phoenix Contact菲尼克斯 MINI MCR-SL-UI-2I-SP-NC-产品快照

产品介绍

Phoenix Contact菲尼克斯 MINI MCR-SL-UI-2I-SP-NC

MINI MCR-SL-UI-2I-SP-NC 2864189 PHOENIX CONTACT MCR 4-way signal duplicator for electrical isolation and dou..

PHOENIX_CONTACT

MCR 4-way signal duplicator for electrical isolation and doubling of analog signals with spring-cage connection, standard configuration

Product description The 6.2 mm wide configurable 4-way isolating amplifier MINI MCR-SL-UI-2I-... is used for electrical isolation, conversion, amplification and filtering of standard signals. On the input side, the analog standard signals 0...20 mA, 4...20 mA, 0...10 V or 1...5V can be selected, on the output side there are two current outputs that can be set independently of one another with a 0...20 mA-, or 4...20mA signal, electrically isolated (4-way isolation). The DIP switches, which can be accessed on the side of the housing, can be used to configure the input and output signal ranges. Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector. Dimensions Width 6.2 mm Height 93.1 mm Depth 102.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection IP20 Input data Number of inputs 1 Configurable/programmable Yes, unconfigured Voltage input signal 0 V ... 10 V (please indicate if different setting when ordering) 1 V ... 5 V Current input signal 0 mA ... 20 mA 4 mA ... 20 mA Max. input voltage 30 V Max. input current 50 mA Input resistance of voltage input approx. 100 kΩ Input resistance current input approx. 50 Ω Output data Number of outputs 2 Configurable/programmable Yes, unconfigured Current output signal 2x 0 mA ... 20 mA 2x 4 mA ... 20 mA Max. output current approx. 22 mA Load/output load current output ≤ 250 Ω (at 20 mA) Power supply Nominal supply voltage 24 V DC Supply voltage range 19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) Max. current consumption < 30 mA (at 24 V DC incl. load) Power consumption < 600 mW Connection data Connection method Spring-cage connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Stripping length 8 mm General No. of channels 2 Maximum transmission error ≤ 0.2 % (of final value) Transmission error, typical < 0.1 % Maximum temperature coefficient < 0.01 %/K Temperature coefficient, typical < 0.004 %/K Limit frequency (3 dB) approx. 35 Hz Protective circuit Transient protection Electrical isolation Basic insulation according to EN 61010 Overvoltage category II Pollution degree 2 Rated insulation voltage 50 V AC/DC Test voltage, input/output/supply 1.5 kV (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Color green Housing material PBT Mounting position any Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. Conformance CE-compliant ATEX Ex II 3 G Ex nA IIC T4 Gc X UL, USA / Canada UL 508 Recognized Class I, Div. 2, Groups A, B, C, D T5 GL GL EMC 2 D EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 5 % Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 5 % Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 5 %

Categories: Converters INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT Modular Converter MCR technique. Analog - PHOENIX CONTACT