Phoenix Contact菲尼克斯 STEP-PS/ 1AC/12DC/1.5 交流稳压电源-产品快照
- 品牌:
- Phoenix Contact
- 型号:
- STEP-PS/ 1AC/12DC/1.5
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 菲尼克斯（中国）投资有限公司 | 025-52121888 | |
| 西连电气（上海）有限公司 | 021-80181890 | 工业连接器供应商 |
| 上海积进自动化设备有限公司 | 021-34273201 | |
| 上海北上自动化设备有限公司 | 400 7720 262 | |
| 南京瀚德电子科技有限公司 | 025-86368030 | 电气连接解决方案 |
| 工控网（北京）电子商务有限公司 | 400-102-5068 | |
| 上海贸泽电子有限公司 | ||
| 欧时电子元件（上海）有限公司 | ||
| 深圳市仕达威实业有限公司 | 400-800-8619 | 德国工业品一站式采购 |
| 众业达电气股份有限公司 | 4008018988 | |
| 福州福大自动化科技有限公司 | 0591-28482265 | |
| 北京京北通宇电子元件有限公司 | 010-82743622 | 国际电子元器件采购服务 |
产品介绍
Phoenix Contact菲尼克斯 STEP-PS/ 1AC/12DC/1.5 交流稳压电源
STEP-PS/ 1AC/12DC/1.5 2868567 PHOENIX CONTACT Primary-switched STEP POWER power supply for DIN rail mounting..
PHOENIX_CONTACT
Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 12 V DC/1.5 A
Product description STEP POWER power supplies for installation distributors The STEP POWER power supply range was developed especially for building automation. The low idling losses and high degree of efficiency ensure maximum energy efficiency. They allow flexible use and can be snapped onto the DIN rail or screwed onto an even surface. Dimensions Width 36 mm Height 90 mm Depth 61 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C (> 55° C derating : 2.5%/K) Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing) Noise immunity EN 61000-6-2:2005 Input data Nominal input voltage range 100 V AC ... 240 V AC Input voltage range 85 V AC ... 264 V AC 95 V DC ... 250 V DC AC frequency range 45 Hz ... 65 Hz Frequency range DC 0 Hz Inrush surge current < 15 A (typical) Power failure bypass > 15 ms (120 V AC) > 70 ms (230 V AC) Input fuse 1.25 A (slow-blow, internal) Choice of suitable circuit breakers 6 A ... 16 A (Characteristics B, C, D, K) Output data Nominal output voltage 12 V DC ±1 % Nominal output current 1.5 A (-25°C ... 55°C) 1.65 A (-25 °C ... 40 °C permanent) Output current I max 2.6 A Derating 55 °C ... 70 °C (2.5%/K) Connection in parallel Yes, for redundancy and increased capacity Connection in series Yes Control deviation < 1 % (change in load, static 10 % ... 90 %) < 2 % (change in load, dynamic 10 % ... 90 %) < 0.1 % (change in input voltage ±10 %) Residual ripple < 75 mV PP (20 MHz) Output power 18 W Typical response time < 0.5 s Peak switching voltages nominal load < 10 mV PP (20 MHz) Maximum power dissipation in no-load condition < 0.4 W Power loss nominal load max. < 3.2 W General Net weight 0.11 kg Operating voltage display Green LED Efficiency > 84 % (for 230 V AC and nominal values) Insulation voltage input/output 4 kV AC (type test) 3.75 kV AC (routine test) Protection class II (in closed control cabinet) MTBF (IEC 61709, SN 29500) > 1800000 h (40°C) Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions Alignable: 0 mm horizontally, 30 mm vertically Connection data, input Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Stripping length 6.5 mm Screw thread M3 Connection data, output Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Stripping length 6.5 mm Screw thread M3 Signaling Output name LED status indicator Status display "DC OK" LED green Note on status display U OUT > 10.8 V: LED on
Categories: Power Supplies TRABTECH Power and Signal Quality - PHOENIX CONTACT Uninterruptible power supply units - PHOENIX CONTACT
更多产品:
更多品牌:
