Phoenix Contact菲尼克斯 MNT-TEL B/F 交流稳压电源-产品快照

产品介绍

Phoenix Contact菲尼克斯 MNT-TEL B/F 交流稳压电源

MNT-TEL B/F 2882404 PHOENIX CONTACT Socket attachment plug with surge protection for the power supply and si..

PHOENIX_CONTACT

Socket attachment plug with surge protection for the power supply and signal connection of a termination device with analog or digital telecommunications interface (VDSL up to 46 Mbps). Cable is included.

Dimensions Height 103 mm Width 63 mm Depth 78 mm Ambient conditions Ambient temperature (operation) -25 °C ... 75 °C Ambient temperature (storage/transport) -25 °C ... 75 °C General Housing material PA 6 Flammability rating according to UL 94 V-0 Standards for cearances and creepage distances VDE 0110-1 IEC 60664-1 IEC 61643-1 EN 61643-11 Total surge current (8/20) µs 10 kA Color jet black RAL 9005 For country-specific use in B, F, CZ, SVK, PL Mounting type Plugging into the mains socket Type Attachment plug Direction of action L/N-PE & Signal Line-Earth Ground Protective circuit, power supply IEC test classification III T3 EN type T3 Nominal voltage U N 230 V AC Arrester rated voltage U C (L-N) 275 V AC Arrester rated voltage U C (L-PE) 360 V AC Arrester rated voltage U C (N-PE) 360 V AC Nominal frequency f N 50 Hz (60 Hz) Standby power consumption P C ≤ 1 VA Residual current I PE ≤ 5 µA Nominal discharge current I n (8/20) µs 3 kA (> 5x) Combination wave U OC 4 kV Energy absorption symmetrical 140 J (L-N) Enery absorption, asymmetrical 220 J (L(N)-PE) Voltage protection level U p (L-N) ≤ 1.2 kV Voltage protection level U p (L-PE) ≤ 1.5 kV Voltage protection level U p (N-PE) ≤ 1.5 kV Total surge current (8/20) µs 10 kA Response time (L-N) ≤ 25 ns Response time (L-PE) ≤ 100 ns Response time (N-PE) ≤ 100 ns Surge protection fault message optical Max. required back-up fuse 16 A AC (gG / B / C) Connection (protective circuit, power supply) Connection method Grounding plug/socket Connection type IN Protective contact plug CEE7 Connection type OUT Protective contact socket CEE7 Protective circuit, information technology Arrester rated voltage U C (Core-Core) 200 V DC Arrester rated voltage U C (Core-Earth) 380 V DC Nominal current I N 1.5 A (25 °C) Operating effective current I C at U C ≤ 150 µA Residual current I PE ≤ 2 µA Insulation resistance R iso ≥ 1 MΩ ≥ 1 GΩ Nominal discharge current I n (8/20) µs (Core-Core) 1 kA Nominal discharge current I n (8/20) µs (Core-Earth) 2.5 kA Max. discharge current I max (8/20) µs 2.5 kA Voltage protection level U p (core-core) ≤ 460 V (C2 - 1 kA) ≤ 350 V (C3 - 25 A) Voltage protection level U p (core-ground) ≤ 900 V (C2 - 2 kA) ≤ 900 V (C3 - 100 A) Response time tA (Core-Core) ≤ 25 ns Response time tA (Core-Earth) ≤ 100 ns Cut-off frequency fg (3 dB), sym. in 100 Ohm system typ. 4 MHz Cut-off frequency fg (3 dB), sym. in 150 Ohm system typ. 3 MHz Cut-off frequency fg (3 dB), sym. in 600 Ohm system typ. 700 kHz Capacity (Core-Core) typ. 1 nF Capacity (Core-Earth) typ. 5 pF Output voltage limitation at 1 kV/µs (wire-wire) ≤ 360 V Residual voltage at I n (conductor-conductor) ≤ 500 V Residual voltage at I n (conductor-ground) ≤ 30 V Residual voltage with Ian (10/1000)µs (conductor-conductor) ≤ 35 V Residual voltage with Ian (10/1000)µs (conductor-ground) ≤ 35 V Impulse durability (conductor-conductor) C2 - 2 kV / 1 kA C3 - 25 A Impulse durability (conductor-ground) C2 - 4 kV/2 kA C3 - 100 A D1 - 500 A Alternating current carrying capacity (conductor-conductor) 250 mA - 1 s Alternating current carrying capacity (conductor-ground) 10 A - 1 s Pulse reset time (conductor-conductor) ≤ 10 ms Power supply, general Connection method RJ12 Connection type IN RJ12 female connector Connection type OUT RJ12 female connector Connection, equipotential bonding, information technology Connection method Via protective contact plug Standards (protective circuit, information technology) IEC test classification C1 C2 C3 D1

Categories: Overvoltage Protection Over Voltage TRABTECH Power and Signal Quality - PHOENIX CONTACT Surge protection - PHOENIX CONTACT