Phoenix Contact菲尼克斯 IL DN BK DI8 DO4-PAC-产品快照

产品介绍

Phoenix Contact菲尼克斯 IL DN BK DI8 DO4-PAC

IL DN BK DI8 DO4-PAC 2897211 PHOENIX CONTACT DeviceNet™ bus coupler, 8 inputs, 24 V DC, 4 outputs, 24 V DC, ..

PHOENIX_CONTACT

DeviceNet™ bus coupler, 8 inputs, 24 V DC, 4 outputs, 24 V DC, 500 mA, complete with I/O connectors

Product description The bus coupler for the DeviceNet™ has 4 digital outputs and 8 digital inputs. This package contains all the necessary Inline connectors for connecting the supply and the I/Os. For project planning, the corresponding EDS (device master data) file for the product is provided in the download center. The Inline terminals can be labeled using pull-out labeling fields. The fields have insert cards that can be labeled individually to suit the application. Additionally, there is the ZBFM-6... Zack marker strip for labeling the terminal points. Dimensions Width 80 mm Height 119.8 mm Depth 71.5 mm Note on dimensions Specfications with connectors Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2) Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 General Net weight 320 g Note on weight specifications with connectors Mounting type DIN rail Diagnostics messages Short-circuit / overload of the digital outputs Yes Sensor supply failure Yes Failure of the actuator supply Yes Interfaces Fieldbus system DeviceNet™ Designation DeviceNet™ Connection method 2x 5-pos. TWIN-COMBICON connectors Transmission speed 500 kBit/s, 250 kBit/s, 125 kBit/s (Can be set via DIP switch or programmed) Number of positions 10 Fieldbus system Lokalbus Designation Inline local bus Connection method Inline data jumper Transmission speed 500 kBit/s / 2 MBit/s (Automatic detection, no combined system) System limits of the bus coupler Number of supported devices max. 63 (per station) Number of local bus devices that can be connected max. 61 (on board I/Os are two devices) Number of devices with parameter channel max. 8 Number of supported branch terminals with remote bus branch 0 Power supply for module electronics Connection method Spring-cage connection Designation Bus coupler supply U BC ; Communications power U L (7.5 V) and the analog supply U ANA (24 V) are generated from the bus coupler supply. Supply voltage 24 V DC (via Inline connector) Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Supply current typ. 70 mA Current consumption max. 0.9 A (from U BK ) Power loss max. 3.5 W (entire device) Communications power U L 7.5 V DC Current consumption 0.8 A Power consumption typ. 1.7 W Inline potentials Communications power U L 7.5 V DC ±5 % Power supply at U L max. 0.8 A DC Main circuit supply U M 24 V DC Supply voltage range U M 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Power supply at U M max. 8 A DC (Sum of U M + U S ) Current consumption from U M max. 8 A DC Segment supply voltage U S 24 V DC Supply voltage range U S 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Power supply at U S max. 8 A DC (Sum of U M + U S ) Current consumption from U S max. 8 A DC I/O supply voltage U ANA 24 V DC Supply voltage range U ANA 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Power supply at U ANA max. 0.5 A DC Digital inputs Input name Digital inputs Connection method Inline connector 2, 3-wire Number of inputs 8 (EN 61131-2 type 1) Typical response time approx. 500 µs Protective circuit Protection against polarity reversal Suppressor diode Input voltage 24 V DC Input voltage range "0" signal -30 V DC ... 5 V DC Input voltage range "1" signal 15 V DC ... 30 V DC Nominal input current at U IN typ. 3 mA Typical input current per channel typ. 3 mA Delay at signal change from 0 to 1 1.2 ms Delay at signal change from 1 to 0 1.2 ms Digital outputs Output name Digital outputs Connection method Inline connector 2, 3-wire Number of outputs 4 Protective circuit Short-circuit and overload protection Free running circuit Output voltage 24 V DC -1 V (At nominal current) Nominal output voltage 24 V DC Maximum output current per channel 500 mA Maximum output current per module / terminal block 2 A Maximum output current per module 2 A Nominal load, inductive 12 VA (1.2 H; 48 Ω) Nominal load, lamp 12 W Nominal load, ohmic 12 W

Categories: Programmable Logic Controllers Plcs AUTOMATION Industrial Automation - PHOENIX CONTACT I/O systems. Connectors - PHOENIX CONTACT