Mean Well明纬 CLG-150-12B-产品快照

产品介绍

Mean Well明纬 CLG-150-12B

CLG-150-12B CLG15012B MEANWELL Input: 90-295 AC / 127-417 DC, Output: 1, V1: 12, A1: 11

MEANWELL

Input: 90-295 AC / 127-417 DC, Output: 1, V1: 12, A1: 11

150W Single Output Switching Power Supply 150W Single Output Switching Power Supply 150W Single Output Switching Power Supply CLG-150series CLG-150series CLG-150seriesFeatures : Features : Features : Universal AC input / Full range (up to 295VAC) Universal AC input / Full range (up to 295VAC) Universal AC input / Full range (up to 295VAC) Built-in active PFCfunction Built-in active PFCfunction Built-in active PFCfunction High efficiencyup to 91% High efficiencyup to 91% High efficiencyup to 91% Protections: Short circuit / Overcurrent / Overvoltage / Overtemperature Protections: Short circuit / Overcurrent / Overvoltage / Overtemperature Protections: Short circuit / Overcurrent / Overvoltage / Overtemperature Cooling by freeair convection Cooling by freeair convection Cooling by freeair convection OCP point adjustable through output cable or internal potentiometer OCP point adjustable through output cable or internal potentiometer OCP point adjustable through output cable or internal potentiometer IP65 / IP67design for indooror outdoor installations IP65 / IP67design for indooror outdoor installations IP65 / IP67design for indooror outdoor installations Suitable for LED lighting andmovingsignapplications Suitable for LED lighting andmovingsignapplications Suitable for LED lighting andmovingsignapplications Compliance to worldwidesafety regulations for lighting Compliance to worldwidesafety regulations for lighting Compliance to worldwidesafety regulations for lighting 3 years warranty 3 years warranty 3 years warrantyF110 F110 F110SELV IP65 IP67 SELV IP65 IP67 SELV IP65 IP67 CLG-150-12 A CLG-150-12 A CLG-150-12 A Blank : IP67rated. Cable for I/O connection. Blank : IP67rated. Cable for I/O connection. Blank : IP67rated. Cable for I/O connection. A : IP65rated. Output voltage andconstant current level canbe adjusted through internal potentiometer. B : IP67rated. Constant current level adjustable through output cable. A : IP65rated. Output voltage andconstant current level canbe adjusted through internal potentiometer. B : IP67rated. Constant current level adjustable through output cable. A : IP65rated. Output voltage andconstant current level canbe adjusted through internal potentiometer. B : IP67rated. Constant current level adjustable through output cable. C : Terminal block for I/O connection. Output voltage andconstant current level canbe adjusted through internal potentiometer. C : Terminal block for I/O connection. Output voltage andconstant current level canbe adjusted through internal potentiometer. C : Terminal block for I/O connection. Output voltage andconstant current level canbe adjusted through internal potentiometer.SPECIFICATION SPECIFICATION SPECIFICATION MODELCLG-150-12 CLG-150-15 CLG-150-20 CLG-150-24 CLG-150-30 CLG-150-36 CLG-150-48 MODELCLG-150-12 CLG-150-15 CLG-150-20 CLG-150-24 CLG-150-30 CLG-150-36 CLG-150-48 MODELCLG-150-12 CLG-150-15 CLG-150-20 CLG-150-24 CLG-150-30 CLG-150-36 CLG-150-48 DC VOLTAGE DC VOLTAGE DC VOLTAGE 12V 12V 12V 15V 15V 15V 20V 20V 20V 24V 24V 24V 30V 30V 30V 36V 36V 36V 48V 48V 48V CONSTANT CURRENT REGION Note.4 9 ~12V CONSTANT CURRENT REGION Note.4 9 ~12V CONSTANT CURRENT REGION Note.4 9 ~12V 11.25 ~ 15V 11.25 ~ 15V 11.25 ~ 15V 15 ~ 20V 15 ~ 20V 15 ~ 20V 18 ~ 24V 18 ~ 24V 18 ~ 24V 22.5 ~ 30V 22.5 ~ 30V 22.5 ~ 30V 27 ~ 36V 27 ~ 36V 27 ~ 36V 36 ~ 48V 36 ~ 48V 36 ~ 48V RATED CURRENT RATED POWER RATED CURRENT RATED POWER RATED CURRENT RATED POWER 11A9.5A 7.5A 6.3A 5A4.2A 3.2A 11A9.5A 7.5A 6.3A 5A4.2A 3.2A 11A9.5A 7.5A 6.3A 5A4.2A 3.2A 132W 142.5W 150W 151.2W 150W 151.2W 153.6W 132W 142.5W 150W 151.2W 150W 151.2W 153.6W 132W 142.5W 150W 151.2W 150W 151.2W 153.6W RIPPLE & NOISE (max.)Note.2150mVp-p 150mVp-p RIPPLE & NOISE (max.)Note.2150mVp-p 150mVp-p RIPPLE & NOISE (max.)Note.2150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 200mVp-p VOLTAGE ADJ. RANGE Note.6 9 ~ 13V VOLTAGE ADJ. RANGE Note.6 9 ~ 13V VOLTAGE ADJ. RANGE Note.6 9 ~ 13V 13 ~ 17V 13 ~ 17V 13 ~ 17V 17 ~ 22V 17 ~ 22V 17 ~ 22V 22 ~ 27V 22 ~ 27V 22 ~ 27V 26 ~ 32V 26 ~ 32V 26 ~ 32V 31 ~ 41V 31 ~ 41V 31 ~ 41V 40 ~ 56V 40 ~ 56V 40 ~ 56V OUTPUT OUTPUT OUTPUTCURRENT ADJ. RANGE CURRENT ADJ. RANGE CURRENT ADJ. RANGE Can be adjusted by internal potentiometer A type and C type only Can be adjusted by internal potentiometer A type and C type only Can be adjusted by internal potentiometer A type and C type only 5.5 ~ 11A 5.5 ~ 11A 5.5 ~ 11A VOLTAGE TOLERANCENote.3 2.0% VOLTAGE TOLERANCENote.3 2.0% VOLTAGE TOLERANCENote.3 2.0% 4.75 ~ 9.5A 4.75 ~ 9.5A 4.75 ~ 9.5A 2.0% 2.0% 2.0% 3.75 ~ 7.5A 3.75 ~ 7.5A 3.75 ~ 7.5A 2.0% 2.0% 2.0% 3.15 ~ 6.3A 3.15 ~ 6.3A 3.15 ~ 6.3A 1.0% 1.0% 1.0% 2.5 ~ 5A 2.5 ~ 5A 2.5 ~ 5A 1.0% 1.0% 1.0% 2.1 ~ 4.2A 2.1 ~ 4.2A 2.1 ~ 4.2A 1.0% 1.0% 1.0% 1.6 ~ 3.2A 1.6 ~ 3.2A 1.6 ~ 3.2A 1.0% 1.0% 1.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) 0.5%0.5%0.5%0.5%0.5%0.5%0.5% 0.5%0.5%0.5%0.5%0.5%0.5%0.5% 0.5%0.5%0.5%0.5%0.5%0.5%0.5% 1.0%1.0%1.0%0.5%0.5%0.5%0.5% 1.0%1.0%1.0%0.5%0.5%0.5%0.5% 1.0%1.0%1.0%0.5%0.5%0.5%0.5% 3000ms, 80ms/115VAC500ms, 80ms/230VAC at full load 3000ms, 80ms/115VAC500ms, 80ms/230VAC at full load 3000ms, 80ms/115VAC500ms, 80ms/230VAC at full load 50ms / 230VAC16ms / 115VAC at full load 50ms / 230VAC16ms / 115VAC at full load 50ms / 230VAC16ms / 115VAC at full load VOLTAGE RANGENote.590 ~ 295VAC127 ~ 417VDC VOLTAGE RANGENote.590 ~ 295VAC127 ~ 417VDC VOLTAGE RANGENote.590 ~ 295VAC127 ~ 417VDCINPUT INPUT INPUT FREQUENCY RANGE POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION EFFICIENCY (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION EFFICIENCY (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT(max.) AC CURRENT (Typ.) INRUSH CURRENT(max.) AC CURRENT (Typ.) INRUSH CURRENT(max.) MAX. No. of PSUs on 16A CIRCUIT BREAKER MAX. No. of PSUs on 16A CIRCUIT BREAKER MAX. No. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT LEAKAGE CURRENT LEAKAGE CURRENT 47 ~ 63Hz 47 ~ 63Hz 47 ~ 63Hz PF>0.98/115VAC,PF>0.95/230VAC,PF>0.93/277VACat full load (Please refer to "Power Factor Characteristic" curve) PF>0.98/115VAC,PF>0.95/230VAC,PF>0.93/277VACat full load (Please refer to "Power Factor Characteristic" curve) PF>0.98/115VAC,PF>0.95/230VAC,PF>0.93/277VACat full load (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading75% at 115VAC/230VACinput and output loading75% at 277VAC input THD< 20% when output loading75% at 115VAC/230VACinput and output loading75% at 277VAC input THD< 20% when output loading75% at 115VAC/230VACinput and output loading75% at 277VAC input 88% 88% 90% 90% 91% 91% 91% 88% 88% 90% 90% 91% 91% 91% 88% 88% 90% 90% 91% 91% 91% 2A / 115VAC1A / 230VAC0.68A / 277VAC 2A / 115VAC1A / 230VAC0.68A / 277VAC 2A / 115VAC1A / 230VAC0.68A / 277VAC COLD START 65A(twidth=595s measured at 50% Ipeak) at 230VAC COLD START 65A(twidth=595s measured at 50% Ipeak) at 230VAC COLD START 65A(twidth=595s measured at 50% Ipeak) at 230VAC3 units (circuit breaker of type B) / 5 units(circuit breaker of type C) at 230VAC 3 units (circuit breaker of type B) / 5 units(circuit breaker of type C) at 230VAC 3 units (circuit breaker of type B) / 5 units(circuit breaker of type C) at 230VAC<1mA / 240VAC <1mA / 240VAC <1mA / 240VAC OVER CURRENT (Typ.)Note.4 95 ~ 108% OVER CURRENT (Typ.)Note.4 95 ~ 108% OVER CURRENT (Typ.)Note.4 95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTIONSHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed PROTECTIONSHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed PROTECTIONSHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed 13.5 ~ 17V18 ~ 23V 23 ~ 28V 28 ~ 34V 33 ~ 39V 42 ~ 50V 59 ~ 70V 13.5 ~ 17V18 ~ 23V 23 ~ 28V 28 ~ 34V 33 ~ 39V 42 ~ 50V 59 ~ 70V 13.5 ~ 17V18 ~ 23V 23 ~ 28V 28 ~ 34V 33 ~ 39V 42 ~ 50V 59 ~ 70V OVER VOLTAGE OVER VOLTAGE OVER VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENTSTORAGE TEMP., HUMIDITY ENVIRONMENTSTORAGE TEMP., HUMIDITY ENVIRONMENTSTORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATIONSAFETY STANDARDS Note.7 SAFETY STANDARDS Note.7 SAFETY STANDARDS Note.7 Protection type : Shut down and latch off o/p voltage, re-power on to recover Protection type : Shut down and latch off o/p voltage, re-power on to recover Protection type : Shut down and latch off o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover -30 ~ +70 (Refer to "Derating Curve") -30 ~ +70 (Refer to "Derating Curve") -30 ~ +70 (Refer to "Derating Curve") 20 ~ 95% RH non-condensing 20 ~ 95% RH non-condensing 20 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH -40 ~ +80, 10 ~ 95% RH -40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 50) 0.03%/ (0 ~ 50) 0.03%/ (0 ~ 50) 10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes 10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes 10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08, UL1012, CAN/CSA-C22.2 No. 107.1-01, UL879, CSA C22.2 No.207-M89, EN61347-1, EN61347-2-13 independent UL8750, CSA C22.2 No. 250.0-08, UL1012, CAN/CSA-C22.2 No. 107.1-01, UL879, CSA C22.2 No.207-M89, EN61347-1, EN61347-2-13 independent UL8750, CSA C22.2 No. 250.0-08, UL1012, CAN/CSA-C22.2 No. 107.1-01, UL879, CSA C22.2 No.207-M89, EN61347-1, EN61347-2-13 independent (except for CLG-150 C type), UL60950-1, TUV EN60950-1,IP65 or IP67, J61347-1(except for CLG-150 C type), J61347-2-13 approved (except for CLG-150 C type), UL60950-1, TUV EN60950-1,IP65 or IP67, J61347-1(except for CLG-150 C type), J61347-2-13 approved (except for CLG-150 C type), UL60950-1, TUV EN60950-1,IP65 or IP67, J61347-1(except for CLG-150 C type), J61347-2-13 approved SAFETY & EMC SAFETY & EMC SAFETY & EMCOTHERS OTHERS OTHERS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION PACKING PACKING PACKING I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:0.5KVAC I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:0.5KVAC I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (75% load) ; EN61000-3-3 Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (75% load) ; EN61000-3-3 Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (75% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria A 303.7K hrs min.MIL-HDBK-217F(25) 303.7K hrs min.MIL-HDBK-217F(25) 303.7K hrs min.MIL-HDBK-217F(25) 222.2*68*38.8mm(L*W*H)(CLG-150-Blank/A/B)229*68*38.8mm(L*W*H)(CLG-150-C) 222.2*68*38.8mm(L*W*H)(CLG-150-Blank/A/B)229*68*38.8mm(L*W*H)(CLG-150-C) 222.2*68*38.8mm(L*W*H)(CLG-150-Blank/A/B)229*68*38.8mm(L*W*H)(CLG-150-C) 1.0Kg; 12pcs/13Kg/0.58CUFT(CLG-150-Blank/A/B)1Kg; 12pcs/13Kg/0.96CUFT(CLG-150-C) 1.0Kg; 12pcs/13Kg/0.58CUFT(CLG-150-Blank/A/B)1Kg; 12pcs/13Kg/0.96CUFT(CLG-150-C) 1.0Kg; 12pcs/13Kg/0.58CUFT(CLG-150-Blank/A/B)1Kg; 12pcs/13Kg/0.96CUFT(CLG-150-C)NOTE NOTE NOTE 1. All parameters NOT specially mentioned aremeasured at 230VACinput,rated loadand25 of ambient temperature. 1. All parameters NOT specially mentioned aremeasured at 230VACinput,rated loadand25 of ambient temperature. 1. All parameters NOT specially mentioned aremeasured at 230VACinput,rated loadand25 of ambient temperature. 2. Ripple& noise aremeasured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf& 47uf parallel capacitor. 2. Ripple& noise aremeasured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf& 47uf parallel capacitor. 2. Ripple& noise aremeasured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf& 47uf parallel capacitor. 3. Tolerance : includes setup tolerance, line regulation andloadregulation. 3. Tolerance : includes setup tolerance, line regulation andloadregulation. 3. Tolerance : includes setup tolerance, line regulation andloadregulation. 4. Please referto "DRIVING METHODSOF LED MODULE". 4. Please referto "DRIVING METHODSOF LED MODULE". 4. Please referto "DRIVING METHODSOF LED MODULE". 5. Derating maybeneeded under low input voltages. Please check thestatic characteristics for more details. 5. Derating maybeneeded under low input voltages. Please check thestatic characteristics for more details. 5. Derating maybeneeded under low input voltages. Please check thestatic characteristics for more details. 6. A typeandC typeonly. 6. A typeandC typeonly. 6. A typeandC typeonly. 7. Safety andEMC design referto EN60598-1, subject 8750(UL), CNS15233, GB7000.1, FCCpart18. 7. Safety andEMC design referto EN60598-1, subject 8750(UL), CNS15233, GB7000.1, FCCpart18. 7. Safety andEMC design referto EN60598-1, subject 8750(UL), CNS15233, GB7000.1, FCCpart18. 8. Thepower supply is considered as a component thatwill beoperated in combination with final equipment. Since EMC performance will beaffected by the complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again. 8. Thepower supply is considered as a component thatwill beoperated in combination with final equipment. Since EMC performance will beaffected by the complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again. 8. Thepower supply is considered as a component thatwill beoperated in combination with final equipment. Since EMC performance will beaffected by the complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again. 9. To fulfill requirements of the latest ErP regulation for lighting fixtures,this LED powersupply canonly be used behind a switch without permanently 9. To fulfill requirements of the latest ErP regulation for lighting fixtures,this LED powersupply canonly be used behind a switch without permanently 9. To fulfill requirements of the latest ErP regulation for lighting fixtures,this LED powersupply canonly be used behind a switch without permanently connected to the mains. connected to the mains. connected to the mains. File Name:CLG-150-SPEC2015-05-28 File Name:CLG-150-SPEC2015-05-28 File Name:CLG-150-SPEC2015-05-28

Categories: Power Supplies LED DRIVERS CLG