EATON伊顿 XN-32DO-24VDC-0.5A-P 数字量输出模块-产品快照

产品介绍

EATON伊顿 XN-32DO-24VDC-0.5A-P 数字量输出模块

XN-32DO-24VDC-0.5A-P 140161 EATON MOELLER Digital output block module XI/ON, 24 V DC, 32DO, 0.5A, pulse-swit..

EATON - MOELLER

Digital output block module XI/ON, 24 V DC, 32DO, 0.5A, pulse-switching

Delivery programme Function XI/ON I/O modules Function XN Block module Short Description 32 Digital output, 24 V DC/0.5 A Positive switching For use with XN-B6T-SBCSBC XN-B6S-SBCSBC Technical data General Standards EN 61000-6-2 EN 61000-6-4 EN 61131-2 Potential isolation Yes, through optocoupler Ambient temperature Ambient temperature, operation °C 0 - +55 Storage, transport ϑ °C -25 - +85 Relative humidity Relative humidity 5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C) Ambient conditions, mechanical Degree of Protection IP20 Harmful gases ppm SO 2 : 10 (rel. humidity < 75%, no condensation) H 2 S: 1.0 (rel. humidity < 75 %,no condensation) Vibration resistance, operating conditions according to IEC/EN 60068-2-6 Mechanical shock resistance g according to IEC 60068-2-27 Continuous shock resistance (IEC/EN 60068-2-29) According to IEC 60068-2-29 Drop and topple According to IEC 60068-2-31, free fall according to IEC 60068-2-32 Electromagnetic compatibility (EMC) ESD kV EN 61100-4-2 Electromagnetic fields V/m EN 61100-4-2 Burst EN 61100-4-4 Surge EN 61100-4-5 Radiated RFI V EN 61100-4-6 Emitted interference (radiated, high frequency) dB EN 55016-2-3 Voltage fluctuations/voltage dips EN 61131-2 Type test to EN 61131-2 Approvals CE, cULus Other technical data (sheet catalogue) >Technical Data Analog input modules Channels Number 32 Rated voltage through supply terminal U L 24 V DC Rated current consumption from supply terminal I L mA 30 Rated current consumption from module bus I MB mA Technical data for design verification Rated operational current for specified heat dissipation I n A 0 Heat dissipation per pole, current-dependent P vid W 0 Equipment heat dissipation, current-dependent P vid W 0 Static heat dissipation, non-current-dependent P vs W 5 Heat dissipation capacity P diss W 0 Operating ambient temperature min. °C 0 Operating ambient temperature max. °C 55 Degree of Protection IP20 IEC/EN 61439 design verification 10.2 Strength of materials and parts 10.2.2 Corrosion resistance Meets the product standard's requirements. 10.2.3.1 Verification of thermal stability of enclosures Meets the product standard's requirements. 10.2.3.2 Verification of resistance of insulating materials to normal heat Meets the product standard's requirements. 10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects Meets the product standard's requirements. 10.2.4 Resistance to ultra-violet (UV) radiation Meets the product standard's requirements. 10.2.5 Lifting Does not apply, since the entire switchgear needs to be evaluated. 10.2.6 Mechanical impact Does not apply, since the entire switchgear needs to be evaluated. 10.2.7 Inscriptions Meets the product standard's requirements. 10.3 Degree of protection of ASSEMBLIES Meets the product standard's requirements. 10.4 Clearances and creepage distances Meets the product standard's requirements. 10.5 Protection against electric shock Does not apply, since the entire switchgear needs to be evaluated. 10.6 Incorporation of switching devices and components Does not apply, since the entire switchgear needs to be evaluated. 10.7 Internal electrical circuits and connections Is the panel builder's responsibility. 10.8 Connections for external conductors Is the panel builder's responsibility. 10.9 Insulation properties 10.9.2 Power-frequency electric strength Is the panel builder's responsibility. 10.9.3 Impulse withstand voltage Is the panel builder's responsibility. 10.9.4 Testing of enclosures made of insulating material Is the panel builder's responsibility. 10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. 10.11 Short-circuit rating Is the panel builder's responsibility. 10.12 Electromagnetic compatibility Is the panel builder's responsibility. 10.13 Mechanical function The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. Technical data ETIM 6.0 (Show features) (Hide features) PLC's (EG000024) / Fieldbus, decentr. periphery - digital I/O module (EC001599) Electric engineering, automation, process control engineering / Control / Field bus, decentralized peripheral / Field bus, decentralized peripheral - digital I/O module ( [email protected] [BAA055011]) Supply voltage AC 50 Hz V 0 - 0 Supply voltage AC 60 Hz V 0 - 0 Supply voltage DC V 18 - 30 Voltage type of supply voltage DC Number of digital inputs 0 Number of digital outputs 32 Digital inputs configurable No Digital outputs configurable No Input current at signal 1 mA 0 Permitted voltage at input V 0 - 0 Type of voltage (input voltage) DC Type of digital output - Output current A 0.5 Permitted voltage at output V 0 - 29 Type of output voltage DC Short-circuit protection, outputs available Yes Number of HW-interfaces industrial Ethernet 0 Number of HW-interfaces PROFINET 0 Number of HW-interfaces RS-232 0 Number of HW-interfaces RS-422 0 Number of HW-interfaces RS-485 0 Number of HW-interfaces serial TTY 0 Number of HW-interfaces parallel 0 Number of HW-interfaces Wireless 0 Number of HW-interfaces other 1 With optical interface No Supporting protocol for TCP/IP No Supporting protocol for PROFIBUS Yes Supporting protocol for CAN Yes Supporting protocol for INTERBUS No Supporting protocol for ASI No Supporting protocol for KNX No Supporting protocol for MODBUS No Supporting protocol for Data-Highway No Supporting protocol for DeviceNet Yes Supporting protocol for SUCONET No Supporting protocol for LON No Supporting protocol for PROFINET IO No Supporting protocol for PROFINET CBA No Supporting protocol for SERCOS No Supporting protocol for Foundation Fieldbus No Supporting protocol for EtherNet/IP No Supporting protocol for AS-Interface Safety at Work No Supporting protocol for DeviceNet Safety No Supporting protocol for INTERBUS-Safety No Supporting protocol for PROFIsafe No Supporting protocol for SafetyBUS p No Supporting protocol for other bus systems Yes Radio standard Bluetooth No Radio standard WLAN 802.11 No Radio standard GPRS No Radio standard GSM No Radio standard UMTS No IO link master No System accessory Yes Degree of protection (IP) IP20 Type of electric connection Plug-in connection Time delay at signal exchange ms 0 - 0.3 Fieldbus connection over separate bus coupler possible Yes Rail mounting possible Yes Wall mounting/direct mounting No Front build in possible No Rack-assembly possible No Suitable for safety functions No Category according to EN 954-1 None SIL according to IEC 61508 None Performance level acc. to EN ISO 13849-1 None Appendant operation agent (Ex ia) No Appendant operation agent (Ex ib) No Explosion safety category for gas None Explosion safety category for dust None Width mm 12.6 Height mm 74.1 Depth mm 55.4 Approvals Product Standards UL 508; CSA-C22.2 No. 142; IEC/EN 6113-2; CE marking UL File No. E205091 UL Category Control No. NRAQ, NRAQ7 CSA File No. UL report applies to both US and Canada CSA Class No. 2252-01, 2252-81 North America Certification UL recognized, certified by UL for use in Canada Specially designed for North America No Current Limiting Circuit-Breaker No Degree of Protection IEC: IP20, UL/CSA Type: - Dimensions MN05002010Z Manual Digital XI/ON modules, power supply modules > >>

Categories: Programmable Logic Controllers Plcs Input/output expansion - EATON - MOELLER