GENERAL ELECTRIC PLS+162115A 电气开关-产品快照
- 品牌:
- GENERAL ELECTRIC
- 型号:
- PLS+162115A
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,cs10@gchane.com , QQ1653501665 |
产品介绍
GENERAL ELECTRIC PLS+162115A 电气开关
PLS+162115A 686097 GENERAL ELECTRIC PULSAR-S+ impulse switch 16A 2CO 115Vac
GENERAL ELECTRIC
PULSAR-S+ impulse switch 16A 2CO 115Vac
Function: Impulse switches are electromechanically controlled switches used to control single- or multi-phase medium-power loads while the control itself can be (very) low power. The device switches between 2 stable positions, each time a (brief) impulse energises its control circuit. Application: Mainly used for the switching of lighting and heating equipment and/or to obtain a simplifi ed wiring in case the load needs to be controlled at reduced voltage and/or from more than 2 different places. Features: • Besides the normal operation through electrically energising the coil, manual operation is possible at all times, except PLS series SA and SB. • The switch position is visualised by the position of the front handle for all devices, except PLS series SA and SB. • The central command version was developed to force several devices at the same time to the on or off position, independently of the current status of each individual device. Also in this case, the possibility of operating the device locally remains. • The safety terminals are equipped with captive Pozidriv screws and have IP20 protection degree. • An add-on auxiliary contact, add-on central-command module and a spacer are available. • 3 and 4 poles devices are multi voltage (except all-in central command). • The use of a large number of luminous push-buttons is possible. • Availability of sealing cap for coil and load terminals. ORDER/DELIVERY STATUS Status Active SPECIFICATIONS Family Impulse switch - PULSAR S+ Rated switching capacity (A) 16A Contact combination 2CO Coil voltage (V) 115 Vac Max load of Incandescent lamp & fluor lamp 3000 W Max load illum circ- No parallel capacitor- fluor lamp 3000 VA Max load illum circ- capacitor parallel to coil- fluor lamp 2500 VA Max load illum circ- Parallel compens capacitor- fluor lamp 1800 VA Rated switching cap 250Vac (1P&2P)/400Vac (3P&4P) 16A Max electr ballast load Rating of the fuse 20A AC/DC AC Number of modules 1 Standard packing 12 Standards CE;IEC 60669-1;IEC 60669-2-2 Coil Voltage range (in % from Un) 90-110% Electrical life service Mechanical 2 x 10 6 Max electr ballast load Max load/phase 20A Max electr ballast load- Max load at inductive load 30 Vdc 16A Max electr ballast load Min load/phase at 5V 2 W Min duration of command impulse (at Un) 0.050 s Min duration of command impulse (at 90% Un) 0.100 s Min duration of pause between 2 impulses 0.150 s Max number of command impulses/minute 250 Rated switching cap Inductive load (at 30Vdc) 16A Number of mod Drive module 1 mod. Number of mod With section power contact 2 mod. Coil Maximum continuous time of coil energisation Unrestricted Max number of push-buttons Not illum push-buttons Unrestricted Max number of illum push-buttons with 3 lamps Unrestricted Max number of illum push-buttons with 2 lamps See technical catalogue Electrical at full voltage AC-1 4 x 10 5 Terminal capacity (diameter min/max) 1.5 - 10 mm² Operating temperature range (min/max) -20°C / +45°C Coil pick-up power (AC) 14.5 VA Coil power-loss - AC 11 VA Coil power-loss - DC 7.5 W DIMENSIONS Weight 0.118 kg CLASSIFICATION ETIM 5.0 EC000188 ETIM 6.0 EC000188
Categories: Energy Meters Control Analizers Residential ENERGY MANAGEMENT