Mean Well明纬 HLG-120H-C1400B-产品快照

产品介绍

Mean Well明纬 HLG-120H-C1400B

HLG-120H-C1400B HLG120HC1400B MEANWELL Input: 90-305 AC / 127-431 DC, Output: 1, V1: 108, A1: 1,4

MEANWELL

Input: 90-305 AC / 127-431 DC, Output: 1, V1: 108, A1: 1,4

150W Single Output LED Power SupplyHLG-120H-Cseries 150W Single Output LED Power SupplyHLG-120H-Cseries 150W Single Output LED Power SupplyHLG-120H-CseriesFeatures : Features : Features : Constant currentdesign Constant currentdesign Constant currentdesign Universal AC input / Full range (up to 305VAC) Universal AC input / Full range (up to 305VAC) Universal AC input / Full range (up to 305VAC) Built-in active PFC function Built-in active PFC function Built-in active PFC function High efficiency up to 94% High efficiency up to 94% High efficiency up to 94% Protections: Short circuit / Over voltage/ Over temperature Protections: Short circuit / Over voltage/ Over temperature Protections: Short circuit / Over voltage/ Over temperature Cooling by free air convection Cooling by free air convection Cooling by free air convection Output currentadjustable throughoutput cableor internal potentiometer Output currentadjustable throughoutput cableor internal potentiometer Output currentadjustable throughoutput cableor internal potentiometer IP67 / IP65 design for indoor or outdoorinstallations IP67 / IP65 design for indoor or outdoorinstallations IP67 / IP65 design for indoor or outdoorinstallations Three in one dimming function (1=10Vdcor 10V PWM signal or resistance) Three in one dimming function (1=10Vdcor 10V PWM signal or resistance) Three in one dimming function (1=10Vdcor 10V PWM signal or resistance) Suitable for dry / damp/ wet locations Suitable for dry / damp/ wet locations Suitable for dry / damp/ wet locations 7 years warranty (Note.5) 7 years warranty (Note.5) 7 years warranty (Note.5)F110 F110 F110MM IP65 IP67 MM IP65 IP67 MM IP65 IP67HLG-120H-C350 A HLG-120H-C350 A HLG-120H-C350 A A : IP65 rated.Constant currentlevel can be adjusted throughinternal potentiometer. A : IP65 rated.Constant currentlevel can be adjusted throughinternal potentiometer. A : IP65 rated.Constant currentlevel can be adjusted throughinternal potentiometer. B : IP67 rated. Constantcurrent level adjustablethrough output cable with 1=10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. B : IP67 rated. Constantcurrent level adjustablethrough output cable with 1=10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. B : IP67 rated. Constantcurrent level adjustablethrough output cable with 1=10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details.SPECIFICATION SPECIFICATION SPECIFICATION MODEL MODEL MODEL HLG-120H-C350HLG-120H-C500HLG-120H-C700HLG-120H-C1050HLG-120H-C1400 HLG-120H-C350HLG-120H-C500HLG-120H-C700HLG-120H-C1050HLG-120H-C1400 HLG-120H-C350HLG-120H-C500HLG-120H-C700HLG-120H-C1050HLG-120H-C1400 RATED CURRENT RATED CURRENT RATED CURRENT 350mA 350mA 350mA 500mA700mA1050mA1400mA 500mA700mA1050mA1400mA 500mA700mA1050mA1400mA CURRENT ACCURACY5.0% CURRENT ACCURACY5.0% CURRENT ACCURACY5.0% CONSTANT CURRENT REGION Note.6 215 ~ 430V150V ~ 300V107V ~ 215V74V ~ 148V54V ~ 108V CONSTANT CURRENT REGION Note.6 215 ~ 430V150V ~ 300V107V ~ 215V74V ~ 148V54V ~ 108V CONSTANT CURRENT REGION Note.6 215 ~ 430V150V ~ 300V107V ~ 215V74V ~ 148V54V ~ 108V RATED POWER RIPPLE CURRENT RATED POWER RIPPLE CURRENT RATED POWER RIPPLE CURRENT 150.5W 150.5W 150.5W 5% 5% 5% 150W150.5W 155.4W 151.2W 150W150.5W 155.4W 151.2W 150W150.5W 155.4W 151.2W OUTPUT OUTPUT OUTPUT RIPPLE & NOISE 2Vp-p1.5Vp-p1Vp-p1Vp-p1Vp-p RIPPLE & NOISE 2Vp-p1.5Vp-p1Vp-p1Vp-p1Vp-p RIPPLE & NOISE 2Vp-p1.5Vp-p1Vp-p1Vp-p1Vp-p Can be adjusted by internal potentiometer (A type only) Can be adjusted by internal potentiometer (A type only) Can be adjusted by internal potentiometer (A type only) CURRENT ADJ. RANGE CURRENT ADJ. RANGE CURRENT ADJ. RANGE 175 ~ 350mA 250 ~ 500mA 175 ~ 350mA 250 ~ 500mA 175 ~ 350mA 250 ~ 500mA 350 ~ 700mA 350 ~ 700mA 350 ~ 700mA 525 ~ 1050mA 525 ~ 1050mA 525 ~ 1050mA 700 ~ 1400mA 700 ~ 1400mA 700 ~ 1400mA LINE REGULATION1% LINE REGULATION1% LINE REGULATION1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% SETUP, RISE TIME HOLD UP TIME (Typ.) SETUP, RISE TIME HOLD UP TIME (Typ.) SETUP, RISE TIME HOLD UP TIME (Typ.) 1000ms, 80ms / 115VAC at full load500ms, 80ms / 230VAC at full load 1000ms, 80ms / 115VAC at full load500ms, 80ms / 230VAC at full load 1000ms, 80ms / 115VAC at full load500ms, 80ms / 230VAC at full load 16ms at full load 230VAC / 115VAC 16ms at full load 230VAC / 115VAC 16ms at full load 230VAC / 115VAC VOLTAGE RANGE Note.2 90 ~ 305VAC127VDC ~ 431VDC VOLTAGE RANGE Note.2 90 ~ 305VAC127VDC ~ 431VDC VOLTAGE RANGE Note.2 90 ~ 305VAC127VDC ~ 431VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 63Hz 47 ~ 63Hz 47 ~ 63Hz PF>0.98/115VAC, PF>0.96/230VAC, PF>0.93/277VAC at full load (Please refer to "Power Factor Characteristic" curve) PF>0.98/115VAC, PF>0.96/230VAC, PF>0.93/277VAC at full load (Please refer to "Power Factor Characteristic" curve) PF>0.98/115VAC, PF>0.96/230VAC, PF>0.93/277VAC at full load (Please refer to "Power Factor Characteristic" curve)INPUT INPUT INPUT TOTAL HARMONIC DISTORTION THD< 20% when output loading50% at 115VAC/230VAC input and output loading75% at 277VAC input TOTAL HARMONIC DISTORTION THD< 20% when output loading50% at 115VAC/230VAC input and output loading75% at 277VAC input TOTAL HARMONIC DISTORTION THD< 20% when output loading50% at 115VAC/230VAC input and output loading75% at 277VAC input EFFICIENCY (Typ.) EFFICIENCY (Typ.) EFFICIENCY (Typ.) 94% 94% 94% 94% 94% 94% 94% 94% 94% 94% 94% 94% 93.5% 93.5% 93.5% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) MAX. No. of PSUs on 16A MAX. No. of PSUs on 16A MAX. No. of PSUs on 16A 1.6A / 115VAC 0.8 A / 230VAC 0.7A / 277VAC COLD START 50A(twidth=600s measured at 50% Ipeak) at 230VAC 1.6A / 115VAC 0.8 A / 230VAC 0.7A / 277VAC COLD START 50A(twidth=600s measured at 50% Ipeak) at 230VAC 1.6A / 115VAC 0.8 A / 230VAC 0.7A / 277VAC COLD START 50A(twidth=600s measured at 50% Ipeak) at 230VAC CIRCUIT BREAKER 4 units (circuit breaker of type B) / 6 units(circuit breaker of type C) at 230VAC CIRCUIT BREAKER 4 units (circuit breaker of type B) / 6 units(circuit breaker of type C) at 230VAC CIRCUIT BREAKER 4 units (circuit breaker of type B) / 6 units(circuit breaker of type C) at 230VAC LEAKAGE CURRENT SHORT CIRCUIT LEAKAGE CURRENT SHORT CIRCUIT LEAKAGE CURRENT SHORT CIRCUIT <0.75mA / 277VAC <0.75mA / 277VAC <0.75mA / 277VAC Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed 475 ~ 495V 475 ~ 495V 475 ~ 495V 335 ~ 355V 335 ~ 355V 335 ~ 355V 240 ~ 260V 240 ~ 260V 240 ~ 260V 165 ~ 175V 165 ~ 175V 165 ~ 175V 120 ~ 130V 120 ~ 130V 120 ~ 130V PROTECTION PROTECTION PROTECTION ENVIRONMENT ENVIRONMENT ENVIRONMENT OVER VOLTAGE OVER VOLTAGE OVER VOLTAGEOVER TEMPERATURE WORKING TEMP. OVER TEMPERATURE WORKING TEMP. OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY WORKING HUMIDITY WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION VIBRATION VIBRATION Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery Shut down o/p voltage, recovers automatically after temperature goes down Shut down o/p voltage, recovers automatically after temperature goes down Shut down o/p voltage, recovers automatically after temperature goes down -40 ~ +70c (Refer to "Derating Curve") -40 ~ +70c (Refer to "Derating Curve") -40 ~ +70c (Refer to "Derating Curve") 10 ~ 95% RH non-condensing 10 ~ 95% RH non-condensing 10 ~ 95% RH non-condensing -40 ~ +80c, 10 ~ 95% RH -40 ~ +80c, 10 ~ 95% RH -40 ~ +80c, 10 ~ 95% RH 0.03%/c (0 ~ 50c) 0.03%/c (0 ~ 50c) 0.03%/c (0 ~ 50c) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.3 UL8750, CSA C22.2 No. 250.12-13, ENEC EN61347-1, EN61347-2-13, EN62384 independent, IP65 or IP67, J61347-1, J61347-2-13 approved SAFETY STANDARDS Note.3 UL8750, CSA C22.2 No. 250.12-13, ENEC EN61347-1, EN61347-2-13, EN62384 independent, IP65 or IP67, J61347-1, J61347-2-13 approved SAFETY STANDARDS Note.3 UL8750, CSA C22.2 No. 250.12-13, ENEC EN61347-1, EN61347-2-13, EN62384 independent, IP65 or IP67, J61347-1, J61347-2-13 approvedSAFETY & EMC SAFETY & EMC SAFETY & EMCOTHERS OTHERS OTHERS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION PACKING PACKING PACKING I/P-O/P:3.75KVAC I/P-FG:2KVACO/P-FG:1.5KVAC I/P-O/P:3.75KVAC I/P-FG:2KVACO/P-FG:1.5KVAC I/P-O/P:3.75KVAC I/P-FG:2KVACO/P-FG:1.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (50% load) ; EN61000-3-3 Compliance to EN55015, EN61000-3-2 Class C (50% load) ; EN61000-3-3 Compliance to EN55015, EN61000-3-2 Class C (50% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge L,N-FG: 4KV), criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge L,N-FG: 4KV), criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge L,N-FG: 4KV), criteria A 191.1K hrs min.MIL-HDBK-217F (25c) 191.1K hrs min.MIL-HDBK-217F (25c) 191.1K hrs min.MIL-HDBK-217F (25c) 220*68*38.8mm (L*W*H) 220*68*38.8mm (L*W*H) 220*68*38.8mm (L*W*H) 1.04Kg; 12pcs/13.5Kg/0.8CUFT 1.04Kg; 12pcs/13.5Kg/0.8CUFT 1.04Kg; 12pcs/13.5Kg/0.8CUFTNOTE NOTE NOTE 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25c of ambient temperature. 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25c of ambient temperature. 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25c of ambient temperature. 2. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 2. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 2. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 3. Safetyand EMC design refer to EN60598-1, CNS15233, GB7000.1. 3. Safetyand EMC design refer to EN60598-1, CNS15233, GB7000.1. 3. Safetyand EMC design refer to EN60598-1, CNS15233, GB7000.1. 4. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 4. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 4. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 5. Referto warrantystatement. 5. Referto warrantystatement. 5. Referto warrantystatement. 6. Please refer to "DRIVING METHODS OF LED MODULE". 6. Please refer to "DRIVING METHODS OF LED MODULE". 6. Please refer to "DRIVING METHODS OF LED MODULE". 7. To fulfill requirements of the latestErP regulation for lighting fixtures, this LED power supply canonly be used behinda switch without permanently connected to the mains. 7. To fulfill requirements of the latestErP regulation for lighting fixtures, this LED power supply canonly be used behinda switch without permanently connected to the mains. 7. To fulfill requirements of the latestErP regulation for lighting fixtures, this LED power supply canonly be used behinda switch without permanently connected to the mains. File Name:HLG-120H-C-SPEC2015-07-23 File Name:HLG-120H-C-SPEC2015-07-23 File Name:HLG-120H-C-SPEC2015-07-23

Categories: Power Supplies LED DRIVERS HLG