Carlo Gavazzi佳乐 RSE1112-BS 软启动器-产品快照
- 品牌:
- Carlo Gavazzi
- 型号:
- RSE1112-BS
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
佳乐商贸(中国)有限公司 | 0755-83699500 | |
上海北上自动化设备有限公司 | 400 7720 262 |
产品介绍
Carlo Gavazzi佳乐 RSE1112-BS 软启动器
RSE1112-BS CARLO GAVAZZI Selected parameters SYSTEM Soft Starter LOAD Phase 1 HOUSING WIDTH 22.5mm to 45mm..
CARLO GAVAZZI
Selected parameters SYSTEM Soft Starter LOAD Phase 1 HOUSING WIDTH >22.5mm to 45mm MOTOR RATING Up to 3kW LOAD CURRENT >10A to 25A CONTROLLED PHASES 1-Phase MAX NUMBER OF STATS PER HOUR >10 to 20 Others LOAD (result) Soft starter for 1-phase induction motors LOAD CURRENT 12A AC MAX MOTOR RATING 1 kW OPERATIONAL VOLTAGE 98-132V ACrms DIMENSIONS 91.7 x 45 x 102 mm CONTROLLED PHASES 1-Phase MAX NUMBER OF STATS PER HOUR 19
Motor Controllers, Single Phase 3-Phase Torque Reduction Types RSE 1112-BS, RSE 2312-BS, RSE 4012-BS • Rated operational current: 12 AAC 53 b • Soft starting of most single phase motors • Torque reduction by use on 3-phase motors • Rated operational voltage: Up to 400 VAC, 50/60 Hz • LED-indications for supply and operation • Transient overvoltage protection built-in • Integral bypassing of semiconductor Product Description Ordering Key RSE 23 12 - BS Compact easy-to-use AC semiconductor motor con- troller. With this controller sin- gle phase capacitor run induction motors with nominal load currents up to 12 A can be soft-started.Starting time as well as initial torque can be independently adjusted by built-in potentiometers. Torque reduction by ramping of a single phase in 3-phase applications is also possible with this module. Solid State Relay Motor controller E-line housing Rated operational voltage Rated operational current Control voltage Single Phase Control Type Selection Rated operationalControl voltageRated operational current Ie voltage UeUc 12 A 11: 115 VACrms, 50/60 Hz -B: 24 to 110 VAC/DC RSE 1112-BS 23: 230 VACrms, 50/60 Hz& 110 to 480 VACRSE 2312-BS 40: 400 VACrms, 50/60 HzRSE 4012-BS InputSpecifications(Control Input) Control voltage Uc A1-A2: 24 - 110 VAC/DC ±15%, 12 mA A1-A3: 110 - 480 VAC ±15%, 5 mA Rated insulation voltage 630 V rms Overvoltage cat. III (IEC 60664) Dielectric strength Dielectric voltage2.5 kVAC (rms) Rated impulse withstand volt. 4 kV (1.2/50 µs) Output Specifications Utilization category AC-53b Integral bypassing of semiconductors Overload current profile (overload relay trip class) 12A: AC-53b: 3-5: 180 Max. number of soft startingsStartings TAInactive per hour (at max. current for 5 s) 19 25ºC 180 s 15 30ºC 225 s 11 40ºC 315 s Min. load current RSE ..12-BS 200 mAAC rms Specifications are subject to change without notice (30.03.2007)1
Categories: Softstarters Soft Starters Motor Switches Soft Starters