Carlo Gavazzi佳乐 PD12CNC01BPM1T 车载传感器-产品快照
- 品牌:
- Carlo Gavazzi
- 型号:
- PD12CNC01BPM1T
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 佳乐商贸（中国）有限公司 | 0755-83699500 | |
| 深圳市天为机电设备有限公司 | 0755-29412191 | |
| 上海北上自动化设备有限公司 | 400 7720 262 |
产品介绍
Carlo Gavazzi佳乐 PD12CNC01BPM1T 车载传感器
PD12CNC01BPM1T CARLO GAVAZZI Selected parameters SYSTEM Colour Sensor HOUSING rectangular SENSING RANGE Dep..
CARLO GAVAZZI
Selected parameters SYSTEM Colour Sensor HOUSING rectangular SENSING RANGE Dependend on sensor CONNECTION M12 plug DC OUTPUT DC NPN/PNP MATERIAL Plastic Others SENSING RANGE 0,60 HOUSING 125 x 61 x 26 mm MATERIAL PC ADDITIONAL Plastic Fibre
Photoelectrics, FibreOptic Sensor Colour Sensor Type PD12CNC0.BPM1T • Range: From 2 to 60 mm, fibre dependent • Teach-In (keyboard or remote setup) • Keyboard lock • Detection of 1 or 1 to 4 recorded colours • Microprocessor controlled and EEPROM parameter storage • Operational voltage 24 V DC • Output 100 mA, NPN and PNP • Light or dark switching selectable • M12 standard plug • IP65 protection • Timer: One shot function 0.05 to 5 s Product Description Ordering Key PD12CNC04BPM1T The Colour Sensor is a fibre opticamplifier made specifi- cally for recognition of 1 or 1 to 4 colours. Teaching of the coloursiseasilyperformed bymeans ofthe “Teach-in” function.Each colourhas a separate output which can be delayed up to 5 sec by means of the built-in timer. The out- put function can also be pro- grammed to be either NO or NC. The colour sensor is used for detectionof colouredlabels, marks,tags,wires,liquids, etc. Type Housing style Housing size Housing material Not used Colour sensor Number of channels Output type Output configuration Connection type Teach-In mode Type Selection Amplifier HousingRangeOrdering no. Ordering no. W x H x D 1-channel4-channel 61 x 115 x 26 mm2 to 60 mmPD12CNC01BPM1T PD12CNC04BPM1T Type Selection Fibres Detection distanceSpot Cable length Ordering no. 18 mmØ 1.5 mm 1000 mmFPDC01SCC100 40 - 60mm Ø 6.0 mm 1000 mmFPDC02SCC100 4 - 6 mmSmall tip 1000 mmFPDC03SCC100 2 - 4 mm12 mm Needle-nose tip 1000 mmFPDC04SCC100 2 - 4 mm40 mm Needle-nose tip 1000 mmFPDC05SCC100 Specifications Detection distance (Sn) 2 to 60 mm, (fibre-dependent) Analysis typeTrue RGB analysis Teach inputActive4 to 24 VDC @10 µs minimum Not active ≤ 1 VDC Recording time 1 sec Levels of sensitivityFine, medium and low Temperature drift< 0,4%/C° Rated operational volt. (UB )24 VDC ±10% (ripple included) Ripple (Urpp)≤ 10% Output current Continuous (Ie) 100 mA Short-time (I) 100 mA No load supply current (Io)120 mA Voltage drop (Ud) IL = 100 mA ≤ 2.2 VDC IL = 10 mA ≤ 0.5 VDC Timer Range programmable 0 to 5 s First step 50 ms Following steps250 ms ProtectionShort-circuit, reverse pola- rity, transients Light sourceLED, red, green and blue Spot diameter0.5 mm Ambient light Incandescent light3’000 Lux Sunlight5’000 Lux Specifications are subject to change without notice (13.01.2014) 1
Categories: Photocells Photoelectric Sensors Detectors Sensors Photoelectric Sensors
更多产品:
更多品牌:
