OMRON欧姆龙 E3X-HD41 2M 放大器-产品快照

产品介绍

OMRON欧姆龙 E3X-HD41 2M 放大器

E3X-HD41 2M 356807 OMRON Fibre optic amplifier, PNP, 24VDC, 2m cable

OMRON

Fibre optic amplifier, PNP, 24VDC, 2m cable

E3X-HD Fiber amplifier Easy-teach digital fiber amplifier The E3X-HD with 1-buttonSmart tune set-up provides fast and simple teaching. Dual digital display and advanced features make the E3X-HD ideal even for demanding applications. • Easy teachingby Smart tuning within a few seconds • Dynamic Power Control (DPC) for highest operational stability for changing environmental conditions or challenging objects • M8 connectormodels •EtherCAT and CompoNet Communication units for high-speedfield bus connectivity Ordering information ItemOrder code Transistor output modelsCommunication unit model*1 NPN outputPNP output Pre-wired E3X-HD11 2ME3X-HD41 2M– Fiber amplifier connectorE3X-HD6 E3X-HD8 E3X-HD0 M8 connector (4pin) E3X-HD14 E3X-HD44 – *1For field bus connection please chose Communication unit E3X-ECT for EtherCATor E3X-CRT for CompoNet. Fiber amplifier connectors ShapeTypeComment Order code Fiber amplifier connector2 m PVC cableE3X-CN11 30 cm PVC cable with M12 plug connector (4 pin) E3X-CN21-M1J 0.3M 30 cm PVC cable with M8 plug connector (4 pin) E3X-CN21-M3J-2 0.3M Communication units ShapeCommunications method Applicable Fiber Amplifier Units Order code CompoNet E3X-HD0 E3X-MDA0 E3X-DA0-S E3X-CRT EtherCATE3X-ECT 252 E3X-HD Fiber amplifier Specifications TypeStandard models For Communications Unit Model E3X-HD11E3X-HD41E3X-HD6E3X-HD8E3X-HD14 E3X-HD44E3X-HD0 Connection method Pre-wired Wire-saving connector M8-4pin connector Communications unit connector Control output NPN outputPNP outputNPN outputPNP output NPN outputPNP output – Light source (wavelength)Red, 4-elementLED (625nm) Power supply voltage12 to 24 VDC±10%, ripple (p-p) 10% max. Power consumptionNormal Mode: 720 mW max. (Current consumption:30 mA max. at 24 VDC, 60 mA max. at 12 VDC.) Power Saving Eco Mode: 530 mW max. (Current consumption: 22 mA max. at 24 VDC, 44 mA max. at 12 VDC.) Control output Load power supply voltage: 26.4VDC max., open-collector output (Varies with the model depending on– output is PNP or NPN.)Load current:50 mA max. (residualvoltage: 2 V max.), OFF current: 0.5 mA max. Super-high-speed Mode Operate or reset:50 μs (NPN models) or 55 μs (PNP models) (SHS) High-speed Mode (HS) Operate or reset: 250 μs Standard Mode (STND) Operate or reset: 1 ms Giga-power Mode (GIGA) Mutual interference prevention Maximum connectable Units Operate or reset: 1 ms Possible for up to 10 units 16 units with E3X-CRT: 16 units with E3X-ECT: 30 units 253 E3X-HD Fiber amplifier Easy One-Button-Teaching/Smart Tuning Easy Solution Fewer Setting Steps Setting of Smart Tuning Conventional Model E3X-HD 1 Step Power adjustment 2 1 Step Smart tuning Power adjustment With workpieceWithout workpiece Step Threshold setting Threshold setting Press only twice. Optimum settings Optimum settings Incident level adjustment with workpiece Incident level adjustment without workpiece Easy Solution Optimum settings for saturated and low incident level Threshold setting Set to intermediate value between the incident levels with and without a workpiece. Settings are simultaneously completed. Easy settingof optimumpowerand thresholdby pushingtunebuttontwice. Smart power control APC Always ON Long-term stability (AUTO POWER CONTROL) Automatically compensate light intensity WithoutAPC With APC Time Smart Power Control DPC Incident level Compen-Compen-Compen- (DYNAMIC POWER CONTROL) Automatically compensate incident level Target value (displayed incident level) Setting value (threshold value) sated. sated. sated. Flashes when compensation is no longer possible. DPC Time Enhanced signal stability control for compensating power reductions caused by temperaturedrift, dust or aging of LED. Field bus connectivity E3X-CRT E3X-ECT Field bus communicationallows control by an external device to simplify setup and reduce wiring effort. 254

Categories: Fiber Optic Sensors Optical E3X