Carlo Gavazzi佳乐 PD30CNG02NPM5RT-产品快照
- 品牌:
- Carlo Gavazzi
- 型号:
- PD30CNG02NPM5RT
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
佳乐商贸(中国)有限公司 | 0755-83699500 | |
上海北上自动化设备有限公司 | 400 7720 262 |
产品介绍
Carlo Gavazzi佳乐 PD30CNG02NPM5RT
PD30CNG02NPM5RT CARLO GAVAZZI Selected parameters SYSTEM Retro-reflective, Transparent HOUSING rectangular ..
CARLO GAVAZZI
Selected parameters SYSTEM Retro-reflective, Transparent HOUSING rectangular SENSING RANGE 1 ... 5 m CONNECTION M12 plug DC OUTPUT DC NPN MATERIAL Plastic Others SENSING RANGE 2 m HOUSING 30 x 20 x 10,8 mm MATERIAL ABS ADDITIONAL Remote teach
Photoelectrics Retro-reflective for Transparent Objects Type PD30CNG02....RT • Miniature sensor range • Range: 2 m, with reflector • Sensitivity adjustment by Teach-In programming • Modulated, red light 617 nm • Supply voltage: 10 to 30 VDC • Output: 100 mA, NPN or PNP preset • Make and break switching function programmable • LED indication for output, stability and power ON • Protection: reverse polarity, short circuit and transients • Cable and plug versions • Excellent EMC performance • Remote teach features Product Description Ordering Key PD30CNG02PPM5RT The PD30CNG02 sensor familycomesin a compact 10 x 30 x 20 mm reinforced PMMA/ABS housing. The sensors are useful in applicationswhere detection of transparent objects are needed. Compact housing and high power LED for excellent per- formance-size ratio. The Teach-In function for adjustmentof the sensitivity makes the sensors highly flexible. The output type is preset (NPN or PNP), and the output switching function is programmable (NO or NC). A remote teach feature allow the sensor to be set up from e.g. a PLC. Type Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type Output configuration Connection type Remote teach Type Selection HousingRangeConnection Ordering no. Ordering no. W x H x DSn NPN PNP Make or break switchingMake or break switching 10 x 30 x 20 mm 2 m Cable PD 30 CNG 02 NPRT PD 30 CNG 02 PPRT 10 x 30 x 20 mm 2 m Plug PD 30 CNG 02 NPM5RTPD 30 CNG 02 PPM5RT Note: Reflectors to be ordered seperately Specifications Rated operating distance (Sn)Up to 2 m, with reflector Ø 80 mm (ER4) Detection reliability 20% attenation Blind zone 10 mm Sensitivity Adjustable by Teach-In Temperature drift ≤ 0.1%/ºC Teach settings are valid for teach temperature ± 20°C Hysteresis (H) (differential travel) ≤ 10% Rated operational volt. (UB )10 to 30 VDC (ripple included) Ripple (Urpp ) ≤ 10% Output current Continuous (Ie) ≤ 100 mA Short-time (I) ≤ 100 mA (max. load capacity 100 nF) No load supply current (Io)≤ 30 mA @ 24 VDC Minimum operational current (Im) 0.5 mA OFF-state current (Ir ) ≤ 100 µA Voltage drop (Ud ) ≤ 2.4 VDC @ 100 mA Protection Short-circuit, reverse polarity and transients Light source inGaAlP, LED, 617 nm Light type, not polarized Red, modulated Sensing angle ± 2º Ambient light10,000 lux Light spot110 mm @ 1.5 m Operating frequency1000 Hz Response time OFF-ON (tON)≤ 0.5 ms ON-OFF (tOFF ) ≤ 0.5 ms Power ON delay (tv) ≤ 300 ms Output function NPN and PNPPreset NO/NC switching function Set up by button Remote teach function Teach on (push button active) 0 to 2.5 VDC (NPN) 5 to 30 VDC (PNP) Tamper proof When activated more than 20 sec. the sensor goes into a Tamper proof mode. Indication Output ON LED, yellow Signal stability ON and power ON LED, green Specifications are subject to change without notice (17.08.2010) 1
Categories: Photocells Photoelectric Sensors Detectors Sensors Photoelectric Sensors