Siemens西门子 3RP2525-2BW30 电子继电器-产品快照

产品介绍

Siemens西门子 3RP2525-2BW30 电子继电器

3RP2525-2BW30 SIEMENS TIME RELAY, ELECTRONIC, DELAYED, 2 CO CONT., 15 TIME SET. RANGES, 0.05S...100HR, 12....

SIEMENS

TIME RELAY, ELECTRONIC, DELAYED, 2 CO CONT., 15 TIME SET. RANGES, 0.05S...100HR, 12...240V AC/DC AT AC 50/60HZ LED, SPRING-LOADED TERMINAL (PUSH-IN)

General technical data: product brand name SIRIUS Product designation 3RP25 timing relays 17.5 mm and 22.5 mm Design of the product slow-operating Mounting position any Product function at the relay outputs Switchover delayed/without delay No Product function non-volatile No Product component ● Relay output Yes ● semi-conductor output No Installation altitude at height above sea level maximum m 2 000 Ambient temperature ● during operation °C -25 ... +60 ● during storage °C -40 ... +85 ● during transport °C -40 ... +85 Relative humidity during operation % 10 ... 95 EMC emitted interference acc. to IEC 61812-1 EN 61000-6-4(3) EMI immunity acc. to IEC 61812-1 EN 61000-6-2 Conducted interference due to burst acc. to IEC 61000-4-4 2 kV network connection / 1 kV control connection Conducted interference due to conductor-earth surge acc. to IEC 61000-4-5 2 kV Conducted interference due to conductor-conductor surge acc. to IEC 61000-4-5 1 kV Electrostatic discharge acc. to IEC 61000-4-2 4 kV contact discharge / 8 kV air discharge Field-bound parasitic coupling acc. to IEC 61000-4-3 10 V/m Surge voltage resistance rated value V 4 000 Power loss [W] total typical W 2 Equipment marking ● acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750 K ● acc. to DIN EN 61346-2 K ● acc. to DIN EN 81346-2 K Category acc. to EN 954-1 none Protection against electrical shock finger-safe Protection class IP IP20 Type of insulation Basic insulation Mechanical service life (switching cycles) typical 10 000 000 Electrical endurance (switching cycles) at AC-15 at 230 V typical 100 000 Operating frequency with 3RT2 contactor maximum 1/h 5 000 Vibration resistance acc. to IEC 60068-2-6 10 ... 55 Hz / 0.35 mm Shock resistance acc. to IEC 60068-2-27 11g / 15 ms Relative repeat accuracy % 1 Recovery time ms 250 Degree of pollution 3 Insulation voltage for overvoltage category III according to IEC 60664 with degree of pollution 3 rated value V 300 Relative setting accuracy relating to full-scale value % 5 Product extension required remote control No Product extension optional remote control No Switching Function: Switching function ● ON-delay Yes ● ON-delay/instantaneous contact No ● passing make contact No ● passing make contact/instantaneous contact No ● OFF delay No ● flashing asymmetrically starting with interval No ● flashing asymmetrically starting with pulse No ● flashing symmetrically starting with pulse No ● flashing symmetrically starting with pulse/instantaneous No ● flashing symmetrically starting with interval No ● flashing symmetrically starting with interval/instantaneous No ● star-delta circuit No ● star-delta circuit with delay time No Switching function with control signal ● additive ON delay No ● passing break contact No ● OFF delay No ● pulse-shaping No ● OFF delay/instantaneous No ● ON-delay/OFF-delay/instantaneous No ● passing break contact/instantaneous No ● additive ON delay/instantaneous No ● ON-delay/OFF-delay No ● passing make contact No ● passing make contact/instantaneous contact No ● pulse delayed No ● pulse delayed/instantaneous No ● pulse-shaping/instantaneous No Switching function of interval relay with control signal ● retrotriggerable with deactivated control signal/instantaneous contact No ● retrotriggerable with activated control signal No ● retrotriggerable with activated control signal/instantaneous contact No ● retriggerable with deactivated control signal No Control circuit/ Control: Adjustable time s 0.05 ... 360 000 Type of voltage of the control supply voltage AC/DC Control supply voltage frequency 1 Hz 50 ... 60 Control supply voltage 1 ● at AC at 50 Hz V 12 ... 240 ● at AC at 60 Hz V 12 ... 240 ● at DC V 12 ... 240 Operating range factor control supply voltage rated value ● at AC — at 50 Hz 0.85 ... 1.1 — at 60 Hz 0.85 ... 1.1 ● at DC 0.85 ... 1.1 Inrush current peak ● at 24 V A 0.3 ● at 240 V A 5 Duration of inrush current peak ● at 24 V ms 0.3 ● at 240 V ms 0.5 Power loss [W] at AC maximum W 1 Power loss [V∙A] at AC maximum V·A 3 Auxiliary circuit: Contact reliability of auxiliary contacts one incorrect switching operation of 100 million switching operations (17 V, 5 mA) Material of switching contacts AgSnO2 Operating current of auxiliary contacts ● at AC-15 — at 24 V A 3 — at 250 V A 3 ● at DC-13 — at 24 V A 1 — at 125 V A 0.2 — at 250 V A 0.1 Influence of the surrounding temperature 1% in the whole temperature range to the set runtime Power supply influence 1% in the whole voltage range to the set runtime Test voltage for isolation test kV 2.5 Design of the fuse link for short-circuit protection of the auxiliary switch required fuse gL/gG: 4 A Thermal current A 5 Switching capacity current with inductive load A 0.01 ... 3 Number of NC contacts ● delayed switching 0 ● instantaneous contact 0 Number of NO contacts ● delayed switching 0 ● instantaneous contact 0 Number of CO contacts ● delayed switching 2 ● instantaneous contact 0 Contact rating of auxiliary contacts according to UL R300 / B300 Installation/ mounting/ dimensions: Mounting type screw and snap-on mounting onto 35 mm standard mounting rail Width mm 22.5 Height mm 100 Depth mm 90 Required spacing with side-by-side mounting ● upwards mm 0 ● forwards mm 0 ● at the side mm 0 ● Backwards mm 0 ● downwards mm 0 Required spacing for grounded parts ● Backwards mm 0 ● at the side mm 0 ● upwards mm 0 ● forwards mm 0 ● downwards mm 0 Required spacing for live parts ● downwards mm 0 ● Backwards mm 0 ● at the side mm 0 ● forwards mm 0 ● upwards mm 0 Connections/ Terminals: Type of electrical connection for auxiliary and control current circuit PUSH-IN connection (spring-loaded connection) Product function removable terminal for auxiliary and control circuit Yes Type of connectable conductor cross-sections ● solid 0.5 ... 4 mm² ● finely stranded — without core end processing 0.5 ... 4 mm² — with core end processing 0.5 ... 2.5 mm² ● at AWG conductors — stranded 20 ... 12 — solid 20 ... 12 Ampacity of the bridge terminals maximum A 10

Categories: Function relays