Siemens西门子 3RK1200-0CQ05-0AA3 数字量输入模块-产品快照

产品介绍

Siemens西门子 3RK1200-0CQ05-0AA3 数字量输入模块

3RK1200-0CQ05-0AA3 SIEMENS AS-INTERFA. COMPACT MODULE K60, DIGITAL, 4I, IP67, 4 X 1 INPUT, MAX. 200MA, PNP,..

SIEMENS

AS-INTERFA. COMPACT MODULE K60, DIGITAL, 4I, IP67, 4 X 1 INPUT, MAX. 200MA, PNP, 4 X M12 STANDARD SOCKET Y-II-ASSIGNMENT ATEX EX II 3D T60 C IP65X OBSERVE SPECIAL CONDITIONS FOR SAFE OPERATION: SUITABLE MEASURES TO PREV. MECHA. DAMAGE REQUIRED. FOR DETAILS SEE OPER. INSTRUC. MOUNTING PLATE 3RK19010CA00 TO BE ORDERED SEPARATELY

General technical data: Design of the product digital I/O modules for operation in the field, IP67 - K60 Type 4 inputs Design of the slave type standard slave I/O configuration 0 ID/ID2 code 1/F Number I/O sockets 4 Type of electrical connection of the inputs and outputs M12 screw-type terminals AS interface total current input max mA 270 operating voltage according to AS-Interface spezification V 26.5 ... 31.6 Ground terminal PIN5 of each M12 socket is connected to the grounding wrist strap in the mounting plate using a pin Addressing front addressing socket Application Use in Zone 22 hazardous areas according to Classification II 3D (dusty atmosphere, non-conductive dust), resistance to shock: 1 joule Conformance with Directive 94/9/EC (ATEX) is verified through compliance with the standards EN 50281-1-1 und EN 60947-5-2 Delivery note the modules are delivered without mounting plate Note 1 All K60 compact modules are delivered with stainless steel screws/sockets Sensor supply: Type of voltage supply for power supply using AS-Interface Input voltage V 20 ... 30 Property of the sensor supply Short-circuit and overload resistant Yes Ampacity of the sensor supply for all inputs ● at ambient temperature 40 °C mA 200 Inputs: Number of digital inputs 4 Type of connection 2- and 3-wire technology Input circuit PNP transistor Type of voltage of the input voltages DC Inputs switching level High min V 10 Input current at digital input ● for signal <1> minimum mA 6 ● with signal <0> maximum mA 1.5 Inputs ● sensor supply using AS-Interface short-circuit and overload resistant ● socket assignment — PIN 1 sensor supply L+ — PIN 2 data input II — PIN 3 sensor supply L- — PIN 4 data input I — PIN 5 ground terminal Design of the pin assignment of the inputs Y-II assignement Outputs: Number of digital outputs 0 Outputs external power supply 24 V DC not required Outputs ● watchdog not required Assignment of the data bits: Assignment of data bits ● socket PIN 4 = IN1 (D0), PIN 2 = IN2 (D1) ● socket 2 PIN 4 = IN2 (D1) ● socket 3 PIN 4 = IN3 (D2) , PIN 2 = IN4 (D3) ● socket 4 PIN 4 = IN4 (D3) ● socket 5 not assigned (closed) ● socket 6 not assigned (closed) ● socket 7 not assigned (closed) ● socket 8 not assigned (closed) Ambient conditions: Ambient temperature ● during operation °C -25 ... +85 ● during storage °C -40 ... +85 Protection class IP IP65 Display: Status display ● display of I/Os yellow LED ● display of Uaux not required ● display of AS-Interface/diagnostics green/red LED Mechanical data: Width mm 60 Height mm 152 Depth mm 29 Mounting type standard rail mounting/wall mounting using mounting plate for K60 compact module Certificates/ approvals: AS-Interface certificate yes (or requested for in case of new units) Approvals UL, CSA, shipbuilding (or requested for in case of new units) Explosion protection category for dust (Ex) II 3D Ex tD A22 IP65X T60°C Limiting conditions for safe operation Suitable measures must be taken to protect the module from mechanical damage. All M12 connectors must be secured by a lock-clip against unauthorized opening such that the connector cannot be disconnected by hand but only by destroying the lock-clip. A suitable lock-clip is available from Binder GmbH + Co., Elektrische Bauelemente KG, Postfach 1152, 74148 Neckarsulm, Germany, Tel. +49 (0)7132/325-0, Fax +49 (0)7132/325-150, [email protected] , Article No. 16-0977-000. All the M12 sockets which are not assigned must be closed with 3RK1 901-1KA01 caps (tamper-proof version) such that they cannot be released by hand. Addressing the module using the 3RK1 904-2AB01 addressing unit is only permitted outside the EX-Zone 22. When the addressing operation is finished, the addressing socket must be closed with a 3RK1 901-1KA01 sealing cap (tamper-proof version) such that it cannot be released by hand. If an additional supply (AUX POWER) is required, it must comply with VDE 0106 (PELV), protection class III. Safety and commissioning instructions The devices are approved for an ambient temperature of -25 to +85 °C. The devices must be configured, connected and commissioned by qualified, responsible personnel only. An incorrect response may cause serious injury to persons and damage to property. It is assumed that personnel are familiar with the assignment of classes to the permitted hazardous zones. The plug connectors and AS-Interface cables must not be connected or disconnected when live. The units require no maintenance. No modifications or repairs are allowed to be carried out on the units. All the above points must be observed in the event of replacement. See also Regulations for Installation EN 60079-14 / EN 50281-1-2. General Product Approval Functional Safety/Safety of Machinery Declaration of Conformity Shipping Approval sonstig Shipping Approval other Bestätigungen other Umweltbestätigung sonstig

Categories: AS-Interface switchgear, SIMOCODE