Baldor葆德 ID5602-BO 电机控制-产品快照
- 品牌:
- Baldor
- 型号:
- ID5602-BO
- 重量:
- 4.6762 kg
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,as10@gchane.com , QQ3350168184 |
产品介绍
Baldor葆德 ID5602-BO 电机控制
ID5602-BO BALDOR 2HP NEMA4 ANALOG VFD 115/230VAC
ID5602-BO
Part Number: ID5602-BO Description: 1.5/2HP, 115/230VAC 1PH Input Output: 6.7 Amps, 230VAC, 3PH Ship Weight: 10.3 lbs.
BALDOR ID5602-BO Hybrid AC Drive Digital Drive with Analog Interface The ID5602-BO Adjustable Frequency Drive is a variable speed control in a NEMA-4X /IP-65 washdown and watertight enclosure. It is designed to operate 208-230 Volt 3-phase AC induction motors through 6.7 Amps RMS. The sine wave coded Pulse Width Modulated (PWM) output operates at a frequency of 16kHz which provides high motor torque, high efficiency and low noise. On/Off AC Line Switch – P/N: 9482, Disconnects the AC line. Mounts on the enclosure cover and is supplied with a switch seal to maintain liquidtight integrity. Forward-Stop-Reverse Switch – P/N: 9480, Provides motor reversing and stop functions. Mounts on the enclosure cover and is supplied with a switch seal to maintain liquidtight integrity. Run-Stop-Jog Switch – P/N: 9340, Selects speed setting from either the Main Speed Potentiometer or the JOG Trimpot. Mounts on the enclosure cover and is supplied with a switch seal to maintain liquidtight integrity. Signal Isolator – P/N: 9600, Provides isolation between a non-isolated signal source and the drive. Mounts on the drive’s PC board with four snap-ins. Auto/Manual Switch – P/N: 9481, When used with the Signal Isolator, it selects remote process signal or the Main Speed Potentiometer. Mounts on the enclosure cover and is supplied with a switch seal to maintain liquidtight integrity. AC Line Filter – P/N: 9507, (Factory Installed) Provides Class A RFI (EMI) suppression. Liquidtight Fittings - P/N: 9526, Provides a liquid-tight seal for wiring the drive. Kit includes necessary liquid-tight fittings *Warning! It is highly recommended that the Signal Isolator (Part No. 9600) be installed when using the drive with external control signals.
Motor Controls