GE通用电气 UNIK5600 压力传感器-产品快照

产品介绍

GE通用电气 UNIK5600 压力传感器

GE Druck UNIK 5600/5700 Marine Certified Pressure Sensor

GE Druck

Certified for use in marine environments Completely configurable - created to your own application High accuracy, reliability and intrinsically safe classification available GE Druck UNIK 5600/5700 Marine Certified Pressure Sensor Details The UNIK 5600 and UNIK 5700 are configurable pressure sensor and is a made-to-order product. To order your sensor, please follow the steps outlined below in 'Ordering Information' and contact our sales team via the phone. Completely bespoke and made to your own specifications, the UNIK 5600 and UNIK 5700 are marine-certified pressure sensors for most zones on board ships and are also available with intrinsically safe classifications. Both models comply with international marine standards, regulations and marine law and are made to the highest standards to deliver best in class performance for stability, low power and high frequency response. The sensor can be configured in a wide variety of different ways, with a huge range of pressure ranges available, different levels of accuracy, different connector types and more. GE Druck UNIK 5600/5700 Marine-Certified Pressure Sensors Key Features Completely customisable - made to your own unique needs Ranges from 70mbar (1psi) to 700bar (10,000psi) Certified for use in marine applications in line with marine standards, regulations and law Intrinsically safe classification available Selectable levels of accuracy Frequency response to 3.5kHz High overpressure capabilities 4-20mA output Multiple pressure connector options DIN 43650 or fully submersible electrical connection available Operating temperature options from -40 to 80°C (-40 to 176°F) Ordering Information Interested in ordering this product? We will require you to follow ALL of the steps below and call us directly so we can get you a price. Step 1) Create the Product's Part Number Every version of the UNIK 5600/5700 will have a unique part number. To get yours, simply create it by selecting an option from every step in the table below. When done, simply add a dash to the end of each section of the part code. Part numbers are in bold. e.g PTX-5-6-N-2-TB-A2-CA-H0-PA 1) Choose Main Product Variant PTX - 4-20mA Pressure Transmitter 2) Choose Product Series 5 - UNIK 5000 3) Choose Diameter and Material 6 - 25mm Stainless Steel 316L Fluid-Isolated (Marine Approved) 7 - 25mm Titanium Fluid-Isolated (Marine Approved) 4) Choose Electrical Connector 7 - DIN 43650 Form A Demountable (Mating Connector Supplied) N - Depth Cable 5) Choose Electronics Option 2 - 4 to 20mA 2-wire (PTX) 6) Choose Compensated Temperature Range TA : -10 to 50°C (14 to 122°F) TB : -20 to 80°C (-4 to 176°F) TC : -40 to 80°C (-40 to 176°F) 7) Choose Accuracy A2 - Improved A3 - Premium 8) Choose Calibration CA - Zero/Span Data 9) Choose Hazardous Area Approval H0 - None H1 - IECEx/ATEX Intrinsically Safe 'ia' Group IIC 10) Choose Pressure Connector PA - G1/4 Female (Note1) PB - G1/4 Male Flat PF - 1/4NPT Male PH - M20x1.5 PN - G1/2 Male Via Adaptor (Note 1) PR - 1/2 NPT Male Via Adaptor (Note 1) PW - Depth Cone (G1/4 Female Open Face Note 1 : select one of these pressure connectors for pressure ranges over 70 bar Step 2) Choose Pressure Range, Type and Units Choose a pressure range, the type of sensor and the unit of measurements. The table below outlines the possible ranges. For example: 0 to 10psi gauge Gauge Ranges Any zero-based range between 70mbar and 70bar (1 to 1,000psi) (values in psi are approximate) Sealed Gauge Ranges Any zero-based range between 10 and 700bar (145 to 10,000psi) (titanium option limited to 70bar) Absolute Ranges Any zero-based range between 100mbar and 700bar (1.5 to 10,000psi) (titanium option limited to 70bar) Differential Ranges (Stainless Steel Option Only) Wet/Dry Uni-directional or bi-directional 70mbar to 35bar (1 to 500psi) Wet/Wet Uni-directional or bi-directional 350mbar to 35bar (5 to 500psi) Line Pressure 70bar max (1000psi) Barometric Ranges Barometric Available with a minimum span of 350mbar (5.1psi) Non-Zero Based Ranges Non-Zero Available - please contact us directly to discuss Step 3) Choose Cable Length and Units Choose your sensor's cable length. Please note that the length must be a specific number - e.g 1 - and cannot be a decimal number - e.g 1.5. Available to maximum length of 100m (300ft). Complete Order Example Choose Part Number - PTX-5-6-N-2-TB-A2-CA-H0-PA Choose Pressure Range/Type/Units: 1 to 10psi gauge Choose Cable Length: 100m Complete Part Number: PTX-5-6-N-2-TB-A2-CA-H0-PA 1 to 10psi gauge 100m cable

1) Choose Main Product Variant PTX - 4-20mA Pressure Transmitter 2) Choose Product Series 5 - UNIK 5000 3) Choose Diameter and Material 6 - 25mm Stainless Steel 316L Fluid-Isolated (Marine Approved) 7 - 25mm Titanium Fluid-Isolated (Marine Approved) 4) Choose Electrical Connector 7 - DIN 43650 Form A Demountable (Mating Connector Supplied) N - Depth Cable 5) Choose Electronics Option 2 - 4 to 20mA 2-wire (PTX) 6) Choose Compensated Temperature Range TA : -10 to 50°C (14 to 122°F) TB : -20 to 80°C (-4 to 176°F) TC : -40 to 80°C (-40 to 176°F) 7) Choose Accuracy A2 - Improved A3 - Premium 8) Choose Calibration CA - Zero/Span Data 9) Choose Hazardous Area Approval H0 - None H1 - IECEx/ATEX Intrinsically Safe 'ia' Group IIC 10) Choose Pressure Connector PA - G1/4 Female (Note1) PB - G1/4 Male Flat PF - 1/4NPT Male PH - M20x1.5 PN - G1/2 Male Via Adaptor (Note 1) PR - 1/2 NPT Male Via Adaptor (Note 1) PW - Depth Cone (G1/4 Female Open Face Note 1 : select one of these pressure connectors for pressure ranges over 70 bar Gauge Ranges Any zero-based range between 70mbar and 70bar (1 to 1,000psi) (values in psi are approximate) Sealed Gauge Ranges Any zero-based range between 10 and 700bar (145 to 10,000psi) (titanium option limited to 70bar) Absolute Ranges Any zero-based range between 100mbar and 700bar (1.5 to 10,000psi) (titanium option limited to 70bar) Differential Ranges (Stainless Steel Option Only) Wet/Dry Uni-directional or bi-directional 70mbar to 35bar (1 to 500psi) Wet/Wet Uni-directional or bi-directional 350mbar to 35bar (5 to 500psi) Line Pressure 70bar max (1000psi) Barometric Ranges Barometric Available with a minimum span of 350mbar (5.1psi) Non-Zero Based Ranges Non-Zero Available - please contact us directly to discuss

Home Process & Industrial Process Control Equipment Pressure Sensors