SUMITOMO住友 policaace ECK-100UU 管件-产品快照
- 品牌:
- SUMITOMO
- 型号:
- policaace ECK-100UU
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 深圳捷迈科技发展有限公司 | 0755-86128820 | |
| 米思米（中国）精密机械贸易有限公司 | 021-67108701 | |
| 旭尚工（广州）贸易有限公司 | 0769-2303-4730 | |
| 中国住友商事会社 | 010-57986800 | |
| 上海住友商事有限公司 | 021-6146 1888 |
产品介绍
SUMITOMO住友 policaace ECK-100UU 管件
Polycarbonate Plate policaace ECK-100UU
Sumitomo Bakelite
Rockwell Hardness R119 Impact Strength (J/m) 780 (Izod method ASTM D 256) Refraction Index 1.585(25deg C) Brittle Temperature (deg C) -135(test code ASTM D 764) Color Transparent Thickness (mm) 6 Width (mm) 300 Deflection Temperature under Load (Degree C) 140(test code ASTM D 648,1.82MPa) Specific Heat (J/kg/K) 1.26x103 Continuous Use Temperature (deg C) About -30 (Min) about 120 (Max) Maximum Allowable Stress/Compression(MPa[kgf/cm2]) Intermittent load (room temperature): 41.2 (420) between ass load (52 deg C in air): 23.5 (240) between ass load (100 deg C in air): 20.6 (210) between ass vibration load or 13.7 (140) repeat:: 6.9 (70) 41.2 (420) permanent load (room temperature): (room Affecting Main Chemicals Type aqueous solution type nitric acid aqueous solution to yellowing and whitening (hydrolysis degradation) type caustic source oder, caustic potash, such as ammonia, such as hydrogen peroxide, chlorine to swelling blushing type methylene chloride benzene Linear Expansion Coefficient 7.0 x 10 -5 SUP> / deg C (at 20 to 120 deg C) and (test method ASTM D696) Heat Transmission Coefficient (W/m2/K) 5.5 Diffusion Light Transmittance (%) 1 Material Polycarbonate Surface Density (kg /m2) 7.2 Parallel Rays Transmittance (%) 86 Total Light Transmission (%) 87 Length (mm) 300 Charpy impact strength (kJ / m 2 sup>) 15-20 (test method JIS K 7111 / 1eA) Tensile Strength (MPa) 34.3 (120 deg C at the time) Maximum Allowable Stress/Tensile (MPa[kgf/cm2]) Intermittent load (room temperature): 27.5 (280) between ass load (52 deg C in air): 23.5 (240) between ass load (100 deg C in air): 20.6 (210) between ass vibration load or 13.7 (140) repeat:: 6.9 (70) 27.5 (280) permanent load (room temperature): (room Bending Strength (MPa) 93.1 (room temperature 20 deg C at the time) (test method ASTM D 790) Bending Modulus of Elasticity (MPa) 2350 (room temperature 20 deg C at the time) (test method ASTM D 790) Others If you want to use in warm water, it is necessary to study sufficient minute. toxic gas hydrochloric acid, ammonia, cyanide, sulfite and the like does not occur to a component of the gas generated by the during heating.
FA and Mechanical Parts Materials - Cut Sheet, Plate, Rod, Pipe, and Sheets Resin Plate (MC Nylon, Acrylic, PVC, Polycarbonate, and POM)
更多产品:
更多品牌:
