Intempco Model LTX50 Level Transmitter 液位仪表液位变送器-产品快照
- 品牌:
- Intempco
- 型号:
- Intempco Model LTX50 Level Transmitter
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,cs10@gchane.com , QQ1653501665 |
产品介绍
Intempco Model LTX50 Level Transmitter 液位仪表液位变送器
Intempco Model LTX50 Level Transmitter
Intempco
Miniature capacitance level transmitter w/4-20mA output, Remote DIN rail mounted transmitter, up to 1000ft away The Intempco Model LTX50 Level Transmitter is compact in design and ideal where installation space is limited or where tanks are small. It is also excellent for mobile equipment applications. The LTX50 can be used to measure level of conductive or non-conductive liquids in metal tanks. In non-metallic tanks, a ground reference electrode must be used. The LTX50 works on the RF principle and monitors level change by converting movement of media up or down the probe into pulse wave form which is proportional to changes in level. The amplifier converts this pulse wave into a 4 to 20mA output signal. The LTX50 comes complete with housing and fitting, probe, cable or connector and remote transmitter. Remote electronics are protected and potted within a metal fitting. The connection between the sensor and the remote transmitter is made via a 3-conductor cable which can be up to a 1000 feet (300 meters) long. The calibration is accomplished via four push buttons, located on transmitter. Applications for the LTX50 include:
Features Continuous loop powered 4-20mA operation Remote DIN Rail mounted transmitter, up to 1000ft away Compact hermetically sealed, vibration resistant construction 1/2” NPT thread standard, others available Probe PFA clad or stainless steel 316 bare 36 inch maximum probe length Cable extension or M12 Micro-Connector Accuracy 1% of span for same dielectric Pressure 14.7 psi (1 bar) Stainless steel 316 and teflon wetted materials 999 ft cable length maximum
Level Instruments Level Transmitters