Greyline Instruments DFM 5.1 Doppler Flow Meter 流量计超声波流量计-产品快照
- 品牌:
- Greyline Instruments
- 型号:
- Greyline Instruments DFM 5.1 Doppler Flow Meter
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,as10@gchane.com , QQ3350168184 |
产品介绍
Greyline Instruments DFM 5.1 Doppler Flow Meter 流量计超声波流量计
Greyline Instruments DFM 5.1 Doppler Flow Meter
Greyline Instruments
Non-contact ultrasonic meter accurately displays, transmits, totalizes and controls flow from outside the pipe The Greyline Instruments DFM 5.1 Doppler flow meter is a simple, non-contact meter designed for applications that would defeat regular contacting flow meters. Because the sensor is mounted on the outside of the pipe, it is unaffected by abrasives or harsh chemicals making it ideal for wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. There is no obstruction to flow and no pressure drop. The DFM 5.1 is recommended for full pipes and any fluid that contains solids or bubbles. The Greyline DFM 5.1 works with PVC, carbon steel, stainless steel, cast iron, fiberglass, and lined pipes-- essentially any pipe material that conducts ultrasound. The non-intrusive, clamp-on ultrasonic sensor fits any pipe with an inside diameter from 1/2 to 180 inches. Installation is easy and doesn't require the system be shut down. No contact is made with the moving fluid and no pipe cutting or drilling is required. There is no fouling or scale build-up on the sensor. The DFM 5.1 Doppler flow meter includes an isolated 4-20mA to transmit flow to remote displays, recorders or controllers. The two programmable relays (upgradeable to six) can be used for flow control, pump protection or flow proportionate pulse. Calibration is easy with the built-in 5-key calibrator. Display and totalize flow in your choice of engineering units (gallons, liters etc.). The standard sensor is rated non-incendive for Class I, Division 2 hazardous locations and the DFM 5.1 can be equipped with optional Intrinsic Safety Barriers for sensor installation in Class I, Division I hazardous locations. A built-in 2 million point Data Logger with USB output to Flash Drives is also available.
Features Flow Rate of ±0.1 to 40ft/sec in most applications Any pipe ID from 1/2 to 180in ±2% of scale accuracy Requires solids or bubbles of at least 100 microns 75ppm concentration ±0.1%, Linearity ±0.5% of full scale repeatability Large, backlit LCD display 12-Digit totalizer Reverse flow measurement Isolated 4-20mA (1000 ohm) 2 programmable control relays (upgradeable to 6) Automatic sensitivity adjustment Built-in 5-key calibrator 2 million point data logger optional USB output to flash memory
Flow Meters Ultrasonic Flow Meters