FloCat SF45-A Turbine Flow Sensor 流量计涡轮/桨轮流量计-产品快照
- 品牌:
- FloCat
- 型号:
- FloCat SF45-A Turbine Flow Sensor
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,as10@gchane.com , QQ3350168184 |
产品介绍
FloCat SF45-A Turbine Flow Sensor 流量计涡轮/桨轮流量计
FloCat SF45-A Turbine Flow Sensor
FloCat
Designed to measure the flow of hydrocarbon fuels and other light transmitting, non-corrosive liquids of similar viscosity The FloCat SF45-A Series Turbine Flow Sensor is designed to measure the flow of hydrocarbon fuels such as gasoline, kerosene, and #2 diesel fuel and other light transmitting, non-corrosive liquids of similar viscosity. The sensor provides repeatable signals on gasoline across a 100 to 1 flow range down to 0.3 GPH. The higher viscosity of diesel fuel reduces signal repeatability at flow rates below 2 GPH. Pressure drops are very low compared to other turbine flow sensors and the bearing system is rated for continuous operation at the upper end of the flow range. The SF45-A sensors produce a current pulse signal from an opto-electronic pickup with a preamplifier. Liquid enters the flow chamber tangentially, follows a helical flow path, and exits vertically, thereby venting any entrained vapor bubbles. The rotational velocity of the liquid is directly proportional to flow rate. A neutrally buoyant rotor spins with the liquid between V-jewel bearings. Rotor movement is sensed when notches in the rotor interrupt an infrared light beam between an LED and phototransistor. The vapor venting design requires that the sensor be positioned with the electrical connectors pointing up. Turbulence caused by valves or sharp elbows mounted close to the sensor inlet can affect the K-factor and should be minimized.
Features Compact, low cost design Very low pressure drop Excellent repeatability between measurements Bearing system rated for continuous operation at upper flow ranges Calibrated K-factor options available Applications: Gasoline Fuel Monitoring Diesel Fuel Monitoring Industrial Furnaces Engine Test Stands
Flow Meters Turbine / Paddlewheel Flow Meters
更多产品:
- ABB Control BEMA300-30
- 10-25132_R-480
- 5710400090
- 4402PZDX 驱动器
- 25-655
- CRCW12102M00JNEA
- Abgepackt: Ja · Anzahl Adern (Teil 1): 3 x · Außen-Durchmesser: 4.1 mm · Biegeradius (Anzahl der Außen-Ø für feste Verlegung): 8 · Biegeradius (Anzahl der Außen-Ø für flexiblen Einsatz): 12 · Farbe: Schwarz · Halogenfrei: Nein · Herst.-Teilenr.: 240302500 皮带