Sun Hydraulics RSBCLAV 液压阀-产品快照
- 品牌:
- Sun Hydraulics
- 型号:
- RSBCLAV
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 上海萨弗工控设备有限公司 | 021-51095192 | |
| 上海伦萨液压设备有限公司 | 021-69008526 | |
| 升旭液压系统有限公司 | 021-51162862 | |
| 橡达油压机械（上海）有限公司 |
产品介绍
Sun Hydraulics RSBCLAV 液压阀
RSBCLAV - Pilot operated, balanced piston sequence valve
Sun Hydraulics
Pilot-operated, balanced piston sequence valves will supply a secondary circuit with flow once the pressure at the inlet (port 1) has exceeded the valve setting. The pressure setting of a sequence valve controls the pressure at port 1 relative to the pressure at the drain (port 3). These valves are insensitive to back pressure at port 2 (sequence), up to the valve setting. They may be used to regulate pressure in place of 2-port relief valves if there is pressure in the return line. All 3 port sequence cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size). Pilot flow continues to increase as the pressure at port 1 (inlet), relative to the pressure at port 3 (drain), rises above the valve setting. The main stage orifice is protected by a 150 micron stainless steel screen. Minimum setting is 75 psi (5 bar) for all spring ranges. Pressure at port 3 is directly additive to the valve setting at a 1:1 ratio and should not exceed 5000 psi (350 bar). Not suitable for use in load holding applications due to spool leakage. Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals. Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations. Cavity T-163A Series 0 Capacity 7.5 gpm30 L/min. Factory Pressure Settings Established at 4 gpm15 L/min. Maximum Operating Pressure 5000 psi350 bar Response Time - Typical 10 ms10 ms Maximum Valve Leakage at 110 SUS (24 cSt) 2 in³/min.30 cc/min. Adjustment - Number of Clockwise Turns to Increase Setting 55 Valve Hex Size 3/4 in.19,1 mm Valve Installation Torque 20 - 25 lbf ft27 - 33 Nm Adjustment Screw Internal Hex Size 5/32 in.4 mm Locknut Hex Size 9/16 in.15 mm Locknut Torque 80 - 90 lbf in.9 - 10 Nm Model Weight .30 lb0,15 kg Seal kit - Cartridge Viton: 990-163-006 Show FAQ How big is a drop of hydraulic oil? There are exactly 250 Sun drops in a cubic inch or 15 in a cc. What does Sun mean by the term sequencing? A sequence valve opens when the pressure at port 1 exceeds the setting of the valve. When pressures at port 1 and port 2 both exceed the setting of the valve the valve goes full open, or sequences. When this happens flow can go in either direction, just so long as port 1 stays above the setting. What are the tolerances on pressure settings for Sun's pressure control valves? Pressure setting tolerances are listed in our Performance Data page. A link to this page can also be found in the Additional Resources tab of the applicable product page. Additional Resources Sun Offers Zinc-Nickel Plating for Corrosion Resistance Sun Cartridges with EPDM Seals Sun Expands Corrosion-Resistant Solutions QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses Sequence Valves Technical Tips Manufacturing Sun Cartridge Cavities Sequence Valves Sun Model Code Explanation; 999-901-334 Cavity Information (S-171) and Tooling Cartridges: Materials of Construction Fluid and Temperature Recommendations Performance Data Sun's Floating Style Screw-In Cartridge Units of Measure, Settings, and Conversions Related Files Download Download Download Download Download Download Download
Home / Sun Hydraulics - RSBCLAV - Pilot operated, balanced piston sequence valve
更多产品:
更多品牌:
