供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,as10@gchane.com , QQ3350168184 |
产品介绍
COPLEY AP2 控制模块
Copley Controls: CANopen Accelnet Plus Module, 2-Axis (AP2 Series)
Copley Controls: Accelnet Plus Module, 2-Axis ( AP2 Series) 14-90V VDC C ANopen Drives for Brushless Motors Description Accelnet AP2 is a high-performance, DC powered servo drive for position, velocity, and torque control of brushless and brush motors. Using advanced FPGA technology, the AP2 provides a significant reduction in the cost per node in multi-axis CAN open systems. each of the two nodes in the AP2 operates as an CAN open node using the CAN open protocol dSp-402 for motion control devices. Supported modes include: profile position-velocity-torque, interpolated position mode (pvt), and Homing. Command sources also include ±10v analog torque/velocity/ position, PWM torque/velocity, and stepper command pulses. Feedback from a number of incremental and absolute encoders is supported. Seventeen high-speed digital inputs with programmable functions are provided, and two low-speed inputs for motor temperature switches. An Sli (Switch & led interface) function is supported by another high-speed input and four high-speed digital outputs. if not used for Sli, the input and outputs are programmable for other functions. three open-drain MOSFET can drive loads powered up to 24 V dc. An RS-232 serial port provides a connection to Copley’s Cme2 software for commissioning, firmware upgrading, and saving configurations to flash memory. drive power is transformer-isolated DC from regulated or unregulated power supplies. An AuxHV input is provided for “keep-alive” operation permitting the drive power stage to be completely powered down without losing position information, or communications with the control system. Control modes Profile Position-Velocity-Torque, Interpolated Position, Homing Camming, Gearing Indexer Command interface CANopen ASCII and discrete I/O Stepper commands ±10V position/velocity/torque command PWM velocity/torque command Master encoder (Gearing/Camming) Communications CANopen • RS-232 Feedback Digital quad A/B encoder, Analog sin/cos incremental, Panasonic incremental A Format SSI, EnDat, Absolute A, T amagawa & Panasonic Absolute A, Sanyo Denki Absolute A, BiSS Aux. encoder Digital Halls I/O Digital: 20 inputs, 7 outputs Analog: 2, 12-bit inputs Dimensions: mm [in] 114 x 73 x 20.6 [4.5 x 2.9 x 0.8] Model No.: AP2-090-06, AP2-090-14, AP2-090-30 Copley Controls: Accelnet Plus Module, 2-Axis ( AP2 Series) 14-90V VDC C ANopen Drives for Brushless Motors Description Accelnet AP2 is a high-performance, DC powered servo drive for position, velocity, and torque control of brushless and brush motors. Using advanced FPGA technology, the AP2 provides a significant reduction in the cost per node in multi-axis CAN open systems. each of the two nodes in the AP2 operates as an CAN open node using the CAN open protocol dSp-402 for motion control devices. Supported modes include: profile position-velocity-torque, interpolated position mode (pvt), and Homing. Command sources also include ±10v analog torque/velocity/ position, PWM torque/velocity, and stepper command pulses. Feedback from a number of incremental and absolute encoders is supported. Seventeen high-speed digital inputs with programmable functions are provided, and two low-speed inputs for motor temperature switches. An Sli (Switch & led interface) function is supported by another high-speed input and four high-speed digital outputs. if not used for Sli, the input and outputs are programmable for other functions. three open-drain MOSFET can drive loads powered up to 24 V dc. An RS-232 serial port provides a connection to Copley’s Cme2 software for commissioning, firmware upgrading, and saving configurations to flash memory. drive power is transformer-isolated DC from regulated or unregulated power supplies. An AuxHV input is provided for “keep-alive” operation permitting the drive power stage to be completely powered down without losing position information, or communications with the control system. Control modes Command interface Communications Feedback I/O Dimensions: mm [in] Model No.: AP2-090-06, AP2-090-14, AP2-090-30
Home Copley Controls