SANYO DENKI山洋电气 T840 串励直流电机-产品快照
- 品牌:
- SANYO DENKI
- 型号:
- T840
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
上海乐利自动化科技有限公司 | ||
山善(深圳)贸易有限公司 | 021-54452266 |
产品介绍
SANYO DENKI山洋电气 T840 串励直流电机
Sanyo Denki: DC Brush Servo Motors (T840 Series)
Sanyo Denki: DC Brush Servo Motors ( T 840 Series) Simplified Setup Process for Optimum Operating Conditions Auto-Tuning: A new auto-tuning algorithm improves system response by providing functions such as inertia identification, 5 auto tuning modes, 30 levels of response, and parameter setting auto-save. Test Function (JOG): On-board JOG operation function is available for testing servo motor and servo amplifier connection without the need to connect to host device. Conformance to Overseas Standards: Our standard servo amplifier has attained the UL, c-UL and EN standards. You can also employ servo motors that have attained the EN standards. All-in-One Control: Configurable parameters allow you to switch between control modes for torque, position or velocity. Setup Software: The setup software allows you to set parameters, view graphical displays of monitored position, velocity or torque waveforms, and perform system analysis. Multi-axial Monitor Function: The setup software allows up to 15 servo amplifi ers to be monitored. Protection Code IP43: Protection code is IP43 for all models. ( Shaft feedthrough and cable end are excluded.) Improved Systems Precision and Shortened Cycle Time High Response: A 4th-order notch filter reduces phase delay to suppress mechanical resonance and improve velocity response of equipment. Vibration-damping Control: With feed-forward vibration suppression control, vibrations at the processing point and base of a machine can be suppressed through simple tuning procedures. Up to 4 types of vibration control frequencies can be selected. Shorter Position Settling Time: A new algorithm drastically shortens positioning settling time for equipment. Disturbance Suppression: It is possible to control impacts from other axes in case of multi-axial constitution, by using the new disturbance observer with extended applicable frequency. Curtailed Running Cost High Resolution: Control suitable for the high-resolution incremental encoder and absolute encoder can be performed. 30% Reduction in Power Loss: A low-power loss module has been employed to reduce the power loss in the main circuit by 30%. Features: Models: T 84 0 -01 2 , T 84 0 T -01 2 , T 84 0 -0 12 EL8 Rated Output: 4 0 0 W Winding S pecifications: 75V System Type of Amplifier ( T840 -012 ): TS1 A 03A T 84 0 -01 2 EL8 Servo A mplifier Input P ower (Control Circuit): DC24V +10, -15% Servo Amplifier Input P ower (Main Circuit): DC14 0V +10, -15% Rated Power capacity (kVA): 1.0 Amplifier Mass (kg): 0. 6 5 Rated S peed/Max. Speed ( min -1): 2500 Rated T orque ( N ・ m): 1.66 Continuous S tall T orque ( N ・ m): 1.70 Rated Armature Voltage (V): 85 Rated Armature C urrent (A): 5.8 Motor Mass [Including Sensor] (kg): 3.65 Sanyo Denki: DC Brush Servo Motors ( T 840 Series) Simplified Setup Process for Optimum Operating Conditions Auto-Tuning: A new auto-tuning algorithm improves system response by providing functions such as inertia identification, 5 auto tuning modes, 30 levels of response, and parameter setting auto-save. Test Function (JOG): On-board JOG operation function is available for testing servo motor and servo amplifier connection without the need to connect to host device. Conformance to Overseas Standards: Our standard servo amplifier has attained the UL, c-UL and EN standards. You can also employ servo motors that have attained the EN standards. All-in-One Control: Configurable parameters allow you to switch between control modes for torque, position or velocity. Setup Software: The setup software allows you to set parameters, view graphical displays of monitored position, velocity or torque waveforms, and perform system analysis. Multi-axial Monitor Function: The setup software allows up to 15 servo amplifi ers to be monitored. Protection Code IP43: Protection code is IP43 for all models. ( Shaft feedthrough and cable end are excluded.) Improved Systems Precision and Shortened Cycle Time High Response: A 4th-order notch filter reduces phase delay to suppress mechanical resonance and improve velocity response of equipment. Vibration-damping Control: With feed-forward vibration suppression control, vibrations at the processing point and base of a machine can be suppressed through simple tuning procedures. Up to 4 types of vibration control frequencies can be selected. Shorter Position Settling Time: A new algorithm drastically shortens positioning settling time for equipment. Disturbance Suppression: It is possible to control impacts from other axes in case of multi-axial constitution, by using the new disturbance observer with extended applicable frequency. Curtailed Running Cost High Resolution: Control suitable for the high-resolution incremental encoder and absolute encoder can be performed. 30% Reduction in Power Loss: A low-power loss module has been employed to reduce the power loss in the main circuit by 30%. Features: T 84 0 -01 2 EL8
Home Sanyo Denki