| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，cs10@gchane.com , QQ1653501665
|
产品介绍
COPLEY SPM 控制模块
Copley Controls: CANopen Stepnet Plus Module, 1-Axis (SPM Series)
Copley Controls: Stepnet Plus Module, 1-Axis ( SPM Series) 14- 90V VDC CANopen Drive for Stepper Motors Description Stepnet SPM is a high-performance, DC powered servo drive for control of stepper motors via CAN open . The SPM operates as an CANopen node using DSP-402 for motion control devices. Supported modes include: Profile Position, Profile Velocity, Interpolated Position Mode (PVT), and Homing. With encoder feedback a stepper can be operated as a brushless servo motor enabling ±10V analog or digital PWM velocity or torque control in addition to CAN open . Direct position control from pulses in CW/CCW, Pulse/Dir, or Quad A/B encoder format works in either microstepping or servo modes. Twelve high-speed digital inputs with programmable functions are provided, and a lower-speed input for a motor temperature switch. An SLI (Serial Peripheral Interface) function is supported by another high-speed input and four high-speed digital outputs. If not used for SLI, the input and outputs are programmable for other functions. Two open-drain MOSFET can drive loads powered up to 24 Vdc. An RS-232 serial port provides a connection to Copley’s CME2 software for commissioning, firmware upgrading, and saving configurations to flash memory. Drive power is transformer-isolated DC from regulated or unregulated power supplies. An AuxHV input is provided for “keep-alive” operation permitting the drive power stage to be completely powered down without losing position information, or communications with the control system. Control Modes Position (Microstepping) Position/Velocity/Torque (Servo Mode) Indexer, Point-to-Point, PVT Camming, Gearing Command Interface CANopen ASCII and discrete I/O Stepper commands ±10V or PWM velocity/torque (servo mode) Master encoder (Gearing/Camming) Communications CANopen RS-232 Feedback Incremental Digital quad A/B encoder I/O Digital: 14 inputs, 6 outputs Analog: 1 input Dimensions: mm [in] 76.3 x 58.2 x 20.5 [3.01 x 2.29 x 0.81] Model No.: SPM-090-07, SPM-090-10 Copley Controls: Stepnet Plus Module, 1-Axis ( SPM Series) 14- 90V VDC CANopen Drive for Stepper Motors Description Stepnet SPM is a high-performance, DC powered servo drive for control of stepper motors via CAN open . The SPM operates as an CANopen node using DSP-402 for motion control devices. Supported modes include: Profile Position, Profile Velocity, Interpolated Position Mode (PVT), and Homing. With encoder feedback a stepper can be operated as a brushless servo motor enabling ±10V analog or digital PWM velocity or torque control in addition to CAN open . Direct position control from pulses in CW/CCW, Pulse/Dir, or Quad A/B encoder format works in either microstepping or servo modes. Twelve high-speed digital inputs with programmable functions are provided, and a lower-speed input for a motor temperature switch. An SLI (Serial Peripheral Interface) function is supported by another high-speed input and four high-speed digital outputs. If not used for SLI, the input and outputs are programmable for other functions. Two open-drain MOSFET can drive loads powered up to 24 Vdc. An RS-232 serial port provides a connection to Copley’s CME2 software for commissioning, firmware upgrading, and saving configurations to flash memory. Drive power is transformer-isolated DC from regulated or unregulated power supplies. An AuxHV input is provided for “keep-alive” operation permitting the drive power stage to be completely powered down without losing position information, or communications with the control system. Control Modes Command Interface Communications Feedback Incremental I/O Dimensions: mm [in] Model No.: SPM-090-07, SPM-090-10
Home Drives
更多产品:
更多品牌:
