Motion Control CONTROLLERSTICK 步进驱动器-产品快照
- 品牌:
- Motion Control
- 型号:
- CONTROLLERSTICK
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，cs11@gchane.com , QQ1429311537
|
产品介绍
Motion Control CONTROLLERSTICK 步进驱动器
AllMotion: CONTROLLERSTICK
AllMotion : CONTROLLERSTICK The ControllerStick was designed to allow a first time user to learn to move a stepper motor intelligently in under half an hour. Housed in a USB Stick measuring only 2" x 1" x 0.5” thick, the fully intelligent stepper motor Controller is capable of providing pullses to and step and direction trype stepper drive. A Stepper Drive is wired to the stick via 4 wires. When inserted to the USB of PC, the drive draws power up to 0.5A from the PC. The ControllerStick appears as a Virtual Com Port, and commands are easily sent via ASCII text from any serial terminal program (such as HyperTerminal ) or from the EZStepper Windows application . The Commands are intuitive and simple. For example, the command A10000 will move the stepper motor to A bsolute position 10000 . (This communications protocol is compatible with devices that use the Cavro DT or OEM protocol.) The ControllerStick is also capable of stand-alone operation with no connection to a PC. It can be set to execute a preset string of commands upon power up (i.e., only power is required in this mode). The Commands include nested loops and execution halt pending a switch closure, which is useful in stand-alone applications. The ControllerStick Stepper Motor Controller will work with any stepper drive that accepts "step and direction" logic inputs. This drive is designed to enable a first time user to make a Stepper Motor move intelligently in less than half an hour. Features Operates from 5V USB Power or external 5V source. Stand alone operation with no connection to a PC Execution Halt pending switch closure Pre-wired for OptoSwitch inputs (see wiring diagram ) Industry standard communications protocol Homes to an Opto or Switch closure with a single command Fully programmable ramps and speeds Four Digital I/O and two 1/2 Amp Power On/Off Drivers included Optional ADC Inputs Support Links CONTROLLERSTICK Wiring Diagram CONTROLLER STICK Command Set CONTROLLER STICK Windows Application CONTROLLER STICK Data Sheet CONTROLLER STICK EZStart AllMotion : CONTROLLERSTICK The ControllerStick was designed to allow a first time user to learn to move a stepper motor intelligently in under half an hour. Housed in a USB Stick measuring only 2" x 1" x 0.5” thick, the fully intelligent stepper motor Controller is capable of providing pullses to and step and direction trype stepper drive. A Stepper Drive is wired to the stick via 4 wires. When inserted to the USB of PC, the drive draws power up to 0.5A from the PC. The ControllerStick appears as a Virtual Com Port, and commands are easily sent via ASCII text from any serial terminal program (such as HyperTerminal ) or from the EZStepper Windows application . The Commands are intuitive and simple. For example, the command A10000 will move the stepper motor to A bsolute position 10000 . (This communications protocol is compatible with devices that use the Cavro DT or OEM protocol.) The ControllerStick is also capable of stand-alone operation with no connection to a PC. It can be set to execute a preset string of commands upon power up (i.e., only power is required in this mode). The Commands include nested loops and execution halt pending a switch closure, which is useful in stand-alone applications. The ControllerStick Stepper Motor Controller will work with any stepper drive that accepts "step and direction" logic inputs. This drive is designed to enable a first time user to make a Stepper Motor move intelligently in less than half an hour. Features Support Links
Home Drives Intelligent Stepper Driver All Motion Stepper Drive
更多产品:
更多品牌:
