KOLLMORGEN科尔摩根 QT-4702-A 串励直流电机-产品快照
- 品牌:
- KOLLMORGEN
- 型号:
- QT-4702-A
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
深圳市长升工业设备有限公司 | 0755-83898955 | |
科尔摩根中国 | 400-661-2802 | |
福迪威西特传感工业控制(天津)有限公司 | 400-661-2802 |
产品介绍
KOLLMORGEN科尔摩根 QT-4702-A 串励直流电机
Kollmorgen: DC Torque Motors (QT-4702-A Series)
Kollmorgen: Direct Drive DC T orque Motor ( QT-4702-A Series) The Direct Drive DC torque motor is a servo actuator which can be directly attached to the load it drives. It has a permanent magnet (PM) field and a wound armature which act together to convert electrical power to torque. This torque can then be utilized in positioning or speed control systems. In general, torque motors are designed for three different types of operation: High stall torque (“stand-still” operation) for positioning systems High torque at low speeds for speed control systems, and Optimum torque at high speed for positioning, rate, or tensioning systems. Direct drive torque motors are particularly suited for servo system applications where it is desirable to minimize size, weight, power and response time, and to maximize rate and position accuracies. Frameless motors range from 28.7mm (1. 13in ) OD weighing 1.4 ounces (.0875 lbs) to a 4067 N-m (3000 lb-ft) unit with a 1067mm ( 42in ) OD and a 660.4mm (26in) open bore ID. Housed motors range from a one inch cube design with 0.049 N-m (7 oz-in) peak torque to any of the frameless motors housed to customer specifications with integral DC tachometers, resolvers, encoders and shaft configurations. Magnet Material The motors are manufactured with one of two magnet materials: Alnico or rare earth (Samarium Cobalt and Neodymium-Iron-Boron). Model numbers preceded by “T’, “NT”, or “OT” have Alnico magnets and models preceded by “QT” have rare earth magnets. These magnet materials have different characteristics which determine their suitability for various applications. QT-4702-A Specifications : Stall Current : 2.7A Startup Current : 0.7A Stall Torque : 6Nm Kollmorgen: Direct Drive DC T orque Motor ( QT-4702-A Series) The Direct Drive DC torque motor is a servo actuator which can be directly attached to the load it drives. It has a permanent magnet (PM) field and a wound armature which act together to convert electrical power to torque. This torque can then be utilized in positioning or speed control systems. In general, torque motors are designed for three different types of operation: Direct drive torque motors are particularly suited for servo system applications where it is desirable to minimize size, weight, power and response time, and to maximize rate and position accuracies. Frameless motors range from 28.7mm (1. 13in ) OD weighing 1.4 ounces (.0875 lbs) to a 4067 N-m (3000 lb-ft) unit with a 1067mm ( 42in ) OD and a 660.4mm (26in) open bore ID. Housed motors range from a one inch cube design with 0.049 N-m (7 oz-in) peak torque to any of the frameless motors housed to customer specifications with integral DC tachometers, resolvers, encoders and shaft configurations. Magnet Material The motors are manufactured with one of two magnet materials: Alnico or rare earth (Samarium Cobalt and Neodymium-Iron-Boron). Model numbers preceded by “T’, “NT”, or “OT” have Alnico magnets and models preceded by “QT” have rare earth magnets. These magnet materials have different characteristics which determine their suitability for various applications. QT-4702-A Specifications :
Home Motors Torque Motors