Mamac HU-226-2-VDC-15 湿度传感器-产品快照

产品介绍

Mamac HU-226-2-VDC-15 湿度传感器

HU-226-2-VDC-15 | Mamac | Temp & RH 2% | Temp: 100K | RH: 0-10VDC | Duct Temp & Humidity Sensor

Mamac

Description The HU-226 is an extremely fast, stable and accurate humidity/temp sensor designed for harsh environments. The polymer humidity capacitance sensor is protected with an ePTFE (expanded Teflon) filter media. The Teflon protected cross-linked capacitive humidity sensor is not affected by prolonged exposure to condensing humidity, harsh environments, contaminants, fog or other extreme environmental conditions. Each unit is individually calibrated in an environmental test chamber to meet or exceed NIST traceable ± 2% or ± 3% accuracies. The HU-226 is temperature compensated for -30°F (-35°C) to +130°F (55°C) operation with negligible error. Field selectable outputs, and fully temperature compensated NIST traceable accuracy, non-interacting zero and span adjustments, NEMA-4 (IP-65) steel enclosure with external mounting bracket, short circuit and reverse polarity protected output, and a liberal five year warranty are some of the features which make the HU-226 the industry's highest performance, most reliable humidity/temp sensor.. The HU-226 incorporates a cross-linked bulk polymer capacitive humidity sensor and precision NTC thermistor, platinum or balco RTD temperature sensor. Both temperature and humidity sensors are immune to most contaminants and at the same time provide a stable, repeatable, accurate humidity and temperature measurement with negligible hysteresis. The sensing elements are not affected by condensation. In fact, the probe may be immersed in distilled water without degrading the calibration accuracy. The HU-226 utilizes sophisticated integrated circuits to provide a high level, fully conditioned, and temperature compensated humidity output. The thermistor temperature sensors are available with more than 16 different industry standard resistance to temperature curves offering compatibility to most if not all control systems. All thermistor sensors offer ±0.2°C interchangeability/accuracy and strictly conform to industry standard R/T curves. The platinum RTDs are available with 100 ohm or 1000 ohm DIN 43760 standards with ±0.12% accuracy at 0°C. All temperature sensors have more than 3.0 mW/°C heat dissipation constant. On VDC output units (humidity only), two additional field selectable options are available; dual outputs 0-5 or 0-10 VDC, and dual unregulated supply voltages 12-35 VAC or 12-40 VDC. By merely moving a switch, one can select the desired output for the specific application. As far as supply voltage is concerned, the unit automatically configures for AC or DC and no field selection is necessary. The VDC output unit is also designed to handle low impedance circuits. In fact, the unit can drive up to 1K ohm minimum. In this way, multiple controllers, indicators, or other devices can be paralleled to the output without performance degradation. The mA output units (humidity only) function over a wide unregulated supply voltage range: 12-40 VDC without any effect on calibration or performance. The unit has reverse polarity protection built in. As a result, it is next to impossible to damage the unit by wiring incorrectly. By using sophisticated low dropout voltage regulators and CMOS integrated circuits, the mA output unit can drive very high output impedance. In fact, with only 12 VDC supply, the unit can drive 250 ohms. At 40 VDC, the unit is capable of handling up to a 1500 ohm load. In this way, the output loop can be tied in series to multiple controllers, indicators, and other devices without degrading the performance. The humidity sensor is protected by an ePTFE (expanded Teflon) filter media that incorporates a proprietary process of expanding or stretching an ultra thin Teflon sheet during the manufacturing process to create less than 1.0 micron (0.000039 inch) pores or holes. The hydrophobic and oleophobic characteristics of Teflon force moisture, condensation and other contaminants to form a bubble larger than the pore size, and the surface tension of the Teflon stops the water or other contaminants from passing through the filter media, thereby protecting the sensing element. However, air with absorbed moisture can easily penetrate the filter media. The HU-226 incorporates a rugged NEMA-4 (IP-65) fully gasketed, dust proof, and splash proof enclosure. The enclosure has an external mounting bracket to facilitate field installation. A ½'' (.875''/22.25 mm diameter) knock-out for conduit connection is also provided. A liquid tight cable connector is supplied if the unit is not being hard wired. Once installed, the enclosure maintains its environmental rating and protects the electronics and the sensing element from condensation, corrosive contaminants and other environmental pollutants. The enclosure also has additional features for ease of installation including unpluggable terminal block, and easily accessible zero and span trimmers. Specifications Humidity Transducer Accuracy*: ± 2%/± 3% RH Range: 0 - 100% RH Hysteresis: ± 1% Supply Voltage: 12 - 40 VDC, 12 - 35 VAC (VDC output units only) Supply Current: VDC units - 10 mA max.; mA units - 20 mA max. Compensated Temperature Range: -30°F to 130°F (-35°C to 55°C) Load Impedance: 1.5K ohms max. at 40 VDC (mA output units), 1K ohms min. (VDC output units) * Includes non-linearity and non-repeatability Platinum RTD Sensor Accuracy: 0.12% at 0°C Resistance: 100 or 1,000 ohm at 0°C Standard: DIN 43760 Heat Dissipation: 3.0 mW/°C R/T Characteristics: Refer to TI.700-11 (See Temperature Sensor section) Operating Temp Range: -30°F to 130°F (-35°C to 55°C) Thermistor Sensor Interchangeability: ±0.2°C Heat Dissipation: 3.0 mW/°C R/T Characteristics: Refer to TI.700-11 (See Temperature Sensor section) Operating Temp Range: -30°F to 130°F (-35°C to 55°C) General Environmental: 10 - 90% RH Non-Condensing Enclosure: 18 Ga C.R. Steel NEMA 4 (IP-65) or ABS plastic Finish: Baked on enamel-PMS2GR88B or off-white Termination: Unpluggable screw terminal block Wire Size: 12 Ga max. Weight: Duct mount: 1.0 lbs. (.45 kg), Wall mount: 0.5 lbs. (.25 kg) Conformance & Testing RoHS Compliant EMC Testing: BS EN 55022:1998, BS EN 55024:1998, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11 Datasheet Photo Drawing Instructions Mamac Product Page

HU-226-2-VDC-15 | Mamac | Temp & RH 2% | Temp: 100K | RH: 0-10VDC | Duct Temp & Humidity Sensor