
Symcom欣控 ACBC-120-SD 控制器-产品快照
- 品牌:
- Symcom
- 型号:
- ACBC-120-SD
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 |
![]() |
产品介绍
Symcom欣控 ACBC-120-SD 控制器
ACBC-120-SD - SymCom Alarm Controller Battery Charger And SD12-Pc Socket
SYMCOM
ACBC-120-SD - SymCom Alarm Controller Battery Charger And SD12-Pc Socket The Model ACBC-120 Family A dual purpose alarm controller/battery charging unit. When there is a loss of 120VAC power, the ACBC-120's primary function as an alarm controller activates. When this power loss occurs, input power is switched to a 12VDC, lead-acid, rechargeable backup battery and a 12VDC alarm consisting of a strobe light and/or a horn is activated. The horn follows a 2 second on/2 second off pattern with a "horn silence" option to turn the sound off. An LED indicator on the unit also signals that the device has entered the alarm mode. When 120VAC input is present the alarm circuit can be tested and the unit's secondary function as a 12VDC backup battery charger is activated. In fast charge mode, the unit has the capability to source up to 100mA of charging current. However, the device normally charges at a current of 14mA in maintenance mode. The alarm circuit can be tested by pressing the "test" button located on the front of the unit or by activating an external switch via the "alarm contact" pin. The device has the ability to signal low battery voltage if the voltage drops below 10.5VDC. The device can also detect if no battery is present or if the battery is connected backwards. In either of these cases, the ACBC-120 will signal a battery error and will not attempt to charge. Features : Controls 12VDC alarm circuit (strobe light and/or horn) Maintains 12VDC battery charge (fast charge mode and maintenance mode) Trip delay timer Battery fault detection and reverse polarity protection LED indicates unit's status Press-to-test capability Download the The SymCom Product Line catalog in *.pdf format Download the SymCom Overview brochure in *.pdf format Download the Alarm Control/Battery Charger datasheet in *.pdf format
Home > Manufacturers > SYMCOM > SYMCOM Electronic Controls & Protection > Pump Controllers > Alarm Control/Battery Charger >