TRACOPOWER TEN 6-4822N 交流电源-产品快照
- 品牌:
- TRACOPOWER
- 型号:
- TEN 6-4822N
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,cs10@gchane.com , QQ1653501665 |
产品介绍
TRACOPOWER TEN 6-4822N 交流电源
TRACOPOWER TEN 6-4822N Isolated Board Mount DC/DC Converter, Fixed, 2 Output, 36 V, 75 V, 6 W, 12 V
TRACOPOWER
The TEN 6-4822N from Tracopower is a high performance dual output 6W DC to DC converter in 24 pin DIP package. It is designed for an optimized cost/performance ratio of DC to DC converter. This DC to DC converter has overload protection, internal filter for EN55022 class A, no minimum load requirement and high efficiency. These features make this converter easy to design in. The device is also a drop in replacement for many cost critical applications with the popular DIP-24 standard package. It has wide 2: 1 input range and tight output voltage regulation. The converter has continuous, automatic recovery short circuit protection and no minimum load is required. The TEN 6-4822N has UL 94V-0 rated non conducting plastic case with UL 94V-0 rated epoxy potting. It is typically used in distributed power architectures, workstations, computer equipments and communications equipments. Input voltage range from 36VDC to 75VDC and input current of 10mA at no load Output voltage of ±12VDC and maximum output current of ±250mA Efficiency of 84% I/O isolation of 1500VDC and maximum voltage set accuracy of ±2% Switching frequency of 330KHz UL/cUL 60950-1 and IEC/EN 60950-1 approved Start-up voltage of 36VDC (or lower) and maximum surge voltage of 100V (1sec maximum) Greater than 1000Mohm I/O isolation resistance at 500VDC and 1000pF I/O isolation capacitance Dimension is 20.3mm x 10.2mm x 31.8mm (W x H x D) Operating temperature range from -40°C to +85°C DC / DC Converter Output Type: Fixed No. of Outputs: 2 Output Input Voltage DC Min: 36V Input Voltage DC Max: 75V Output Power Max: 6W Output Voltage Nom.: Output Current Max: Output Voltage - Output 1: 12V No. of Outputs: Output Voltage - Output 2: -12V Output Current - Output 1: 250mA Output Current - Output 2: 250mA DC / DC Converter Type: DIP DC / DC Converter Mounting: Through Hole Approvals & Standards: CSA, IEC, UL Width: 20.3mm Height: 10.2mm Depth: 31.8mm Output Voltage - Output 3: - Output Current - Output 3: - Product Range: TEN 6N Series SVHC: No SVHC (17-Dec-2015) Find similar products grouped by common attribute
Home Power & Line Protection Power Supplies DC / DC Converters Isolated Board Mount Converters - DC / DC TEN 6-4822N