Tsubaki 35B20FH Finished Bore Sprocket, Single Strand, Inch, #35 ANSI No., 3/8" Pitch, 20 Teeth, 1/2" Bore 链条-产品快照
- 品牌:
- TSUBAKI
- 型号:
- Tsubaki 35B20FH Finished Bore Sprocket, Single Strand, Inch, #35 ANSI No., 3/8" Pitch, 20 Teeth, 1/2" Bore
- 重量:
- 0.0681 kg
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 深圳市日贸机电有限公司 | 0755-82559810 | |
| 上海武田机电有限公司 | 021-51085793 | |
| 旭尚工（广州）贸易有限公司 | 0769-2303-4730 | |
| 上海骜创自动化有限公司 | 021-58655735 | |
| 上海凌圣机电科技有限公司 | 021-59761948 | 动力传动与控制解决 |
| 广州高灏链条重机有限公司 | 020-38889056 | 专营传动器材、传动链条 |
| 广州市晶川机电设备有限公司 | 020-85649581 |
产品介绍
Tsubaki 35B20FH Finished Bore Sprocket, Single Strand, Inch, #35 ANSI No., 3/8" Pitch, 20 Teeth, 1/2" Bore 链条
Tsubaki 35B20FH Finished Bore Sprocket, Single Strand, Inch, #35 ANSI No., 3/8" Pitch, 20 Teeth, 1/2" Bore
Tsubaki
This Tsubaki roller chain sprocket has a 3/8-inch pitch, fits size 35 chains, and is single strand with one set of teeth around its circumference for use with single strand chains. It is a Type B sprocket with a hub projection encircling the bore on one side and is ready for installation on a shaft of the appropriate diameter. The teeth of the sprocket help prevent slipping and binding to avoid power loss in assemblies. It meets International Organization for Standardization (ISO) 9001 for quality assurance. This single strand roller chain sprocket is suitable for use in a broad range of applications involving light to moderate loads and ongoing, high-cycle operations, including vehicle transmission systems, construction and agricultural equipment, conveyors, and factory manufacturing and assembly lines, among others. A roller chain sprocket is a thin wheel with deep, uniformly spaced teeth ringing its circumference. The distance from the peak of one tooth to the next is called the pitch, and is commonly measured in 1/8-inch increments. The sprocket transfers power and motion by a roller chain that is threaded over the teeth of the sprocket. The alignment of the chain with the sprocket's pitch prevents the chain from slipping so that no power is lost. In the center of the sprocket is the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is often fitted to the sprocket’s hub to custom-fit the sprocket onto a shaft to hold it firmly in place. A hub is a protruding, raised lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs on one side are Type B, and sprockets with no hubs are Type A sprockets. For applications requiring sprockets to be swapped onto shafts of different diameters, a sprocket with a bore large enough to fit all shafts can be used, with the gap between the bore and shaft closed with a bushing or bearing. Roller chain sprockets are used in a broad range of applications where the drive power of an engine needs to be transferred into motion, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others. U.S. Tsubaki Power Transmission manufactures a variety of chains, sprockets, and other power transmission components that meet International Organization for Standardization (ISO) standards for quality assurance. The company, founded in 1917, is headquartered in Wheeling, IL. , Single strand sprocket with one set of teeth around the circumference for applications where a single chain can support the torque and load Pitch of 3/8 inch for size 35 chains Ready-to-install finished bore with a wide hub on one side Type B sprocket with a hub projection on one side to accommodate various types of bushings to help prevent sprocket from slipping on the shaft Sprocket teeth help prevent slipping and binding to avoid power loss in assemblies
Manufacturer: Tsubaki Brand: Tsubaki UPC: 097039320339 , Package Weight: 0.15 pounds Package Size: 3.3 x 0.9 x 0.9 inches Units in Package: 1
SHOP ROLLER CHAIN SPROCKETS PAGE 56
更多产品:
更多品牌:
