SICK施克 1034094 交流电机-产品快照
- 品牌:
- SICK
- 型号:
- 1034094
- 重量:
- 0.081 kg
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
福建萤光电气科技发展有限公司 | 18359060969 | |
福州福诺自动化设备有限公司 | 0591-87880180 | |
广州市西克传感器有限公司 | 4000121000 | |
买道传感科技(上海)有限公司 | 021-51872140 | |
上海桂伦自动化设备有限公司 | 021-56519159 | |
深圳市中南科达科技有限公司 | 0755-86110175 | |
深圳市洲其电气自动化设备有限公司 | 0755-26016618 | |
深圳市丰德锐科技有限公司 | 0755-82526060 | |
上海锝秉工控设备有限公司 | 021-39520660 | 工业自动化控制 |
产品介绍
SICK施克 1034094 交流电机
Sick SKM36-HFA0-K02 (1034094)
Sick
SKM36-HFA0-K02 MOTORFEEDBACK HIPERFACE 128 Sin/Cos periodes 4096 rev ; Motor feedback systems for the standard performance range 128 sine/cosine periods per revolution Absolute position with a resolution of 4,096 increments per revolution and 4,096 revolutions with the multiturn system Programming of the position value and electronic type label HIPERFACE® interface Integrated version and stand-alone design Certified according to SIL2/PL d (only valid for SKS36S/SKM36S-H...) Conforms to RoHs Your benefits The small dimension allows manufacturers of low-power and minimal-power motors to considerably reduce the size of their motors The stand-alone version is ideally suited as a master and path encoders The SKS/SKM36 motor feedback systems have strongly penetrated the drive technology market The consistent mechanical components in SEK/SEL37 allow for a high degree of flexibility with various encoder systems Performance Number of sine/cosine periods per revolution: 128 Number of the absolute ascertainable revolutions: 4,096 (Multiturn) Total number of steps: 16,777,216 Measuring step: 2.5 angular seconds (at interpolation of the sine/cosine signals with e.g. 12 Bit) Error limits for the digital absolute value: ± 320 angular seconds (via RS485) Integral non-linearity typ.: ± 80 angular seconds (Error limits for evaluating sine/cosine period) Differential non-linearity: ± 40 angular seconds (Non-linearity within a sine/cosine period) Operating speed: 9,000 /min, up to which the absolute position can be reliably produced Available memory area: 1,792 Byte (EEPROM 2048) Mechanical data Flange type/stator coupling: Spring mounting plate Dimensions: See dimensional drawing Mass: 0.07 kg Moment of inertia of the rotor: 4.5 gcm² Maximum angular acceleration: 500,000 rad/s² Operating torque: 0.2 Ncm Start up torque: 0.3 Ncm Permissible shaft movement, radial, static: ± 0.1 mm Permissible shaft movement, radial, dynamic: ± 0.05 mm Permissible shaft movement, axial, static: ± 0.2 mm Permissible shaft movement, axial, dynamic: ± 0.1 mm Life of ball bearings: 3.6 x 10^9 revolutions Connection type: Connector, 8-pin, radial Shaft version: Tapered shaft Electrical data Electrical interface: HIPERFACE Operating voltage range/supply Voltage: 7 V DC ... 12 V DC Recommended supply voltage: 8 V DC Operating current: 60 mA Output frequency for sine/cosine signals: 0 kHz ... 65 kHz Without load Interfaces Type of code for the absolute value: Binary Code sequence: Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing) Interface signals: Process data channel SIN, REFSIN, COS, REFCOS: analog, differential parameter channel RS 485: digital Ambient data Working temperature range: -20 °C ... 110 °C Storage temperature range: -40 °C ... 125 °C, without package Relative humidity / Condensation: 90 %, Condensation not permitted Resistance to shocks: 100 g, 6 ms (according to EN 60068-2-27) Resistance to vibration: 50 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) EMC: According to EN 61000-6-2 and EN 61000-6-3 1) Enclosure rating: IP 50, according to IEC 60529, with mating connector inserted and closed cover 1) The EMC according to the standards quoted is achieved when the motor feedback system is mounted in an electrically conductive housing, which is connected to the central earthing point of the motor controller via a cable screen. This is also where the GND (0 V) connection of the power supply voltage is linked to earth. Users must perform their own tests when other screen designs are used.
Products specifications Manufacturer category Sick SKM36 Manufacturer Sick
Home Home / Encoders Encoders / Motorfeed back systems Motorfeed back systems /