QMA34M 发动机-产品快照
- 品牌:
- 型号:
- QMA34M
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,cs10@gchane.com , QQ1653501665 |
产品介绍
QMA34M 发动机
Q.MAX PUNCH 34MM
Q.MAX PUNCH 34MM
A quick and easy way to cut clean holes in sheet metal up to 16 gauge. Special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the Allen screw and then pass the Allen screw through the hole. Position thedie on top of the die nut and then screw the die nut onto the projecting Allen screw until it touches the metal sheet. Use an Allen key to turn the Allen screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there isno die nut. Size.34.0mm. Key Type.MC. 10mm
TOOLS HANDTOOLS ENGINEERING TOOLS