ICM Controls SC2211L-产品快照
- 品牌:
- ICM Controls
- 型号:
- SC2211L
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,as10@gchane.com , QQ3350168184 |
产品介绍
ICM Controls SC2211L
ICM Controls SC2211L
ICM Controls
The SC2211 is a multi-stage, heat pump thermostat for 24 VAC systems. The thermostat activates the heat pump when the room temperature is below the heat set temperature (by the differential temperature). Auxiliary heat will be activated if the room temperature continues to drop. Third stage heat is activated (on some systems) if the temperature drops further. The heat outputs are staged off (configurable, setting 5) as the room temperature increases. The thermostat will not let the compressor come on for four minutes after it turns off. This protects your compressor. When the room temperature is greater than the cool set temperature (by the differential temperature), the cooling device is activated. Second-stage cooling will be activated if the room temperature continues to rise. The cool outputs are staged off (configurable, setting 5) as the room temperature decreases. The thermostat will not let the compressor come on for four minutes after it turns off. This protects your compressor. The SC2211 has the following operating modes: OFF, Heat, Emergency Heat and Cool. In OFF mode, the thermostat will not turn on heating or cooling devices. In the Heat mode, the thermostat controls the heat pump system. In the Emergency Heat mode, the heat pump is bypassed and auxiliary becomes the primary heat source. In the Cool mode, the thermostat controls the cooling system. The indoor fan can be turned on in all operating modes using the Fan switch. Features For heat pumps only 3 stage heat/2 stage cool Single compressor heat pump system with auxiliary heat New ICM patented Thermal Intrusion Barrier Large display with backlight Adjustable temperature differential Zoning system compatible Hardwired Anti-short cycle time: 4 minutes Manual changeover Easy access terminal block Precise temperature sensing Soft touch controls Keypad lockout Status LEDs
Application: Multi Stage (Heat/Cool) Heat Pump Stages: 3 Heat/2 Cool Programmability: Non-Programmable User Interface: Push Button Mount: Horizontal Options: Large Display Password Lockout Power Method: Hardwired Temperature Control Range: 45°F to 90°F Voltage: 24v Amperage: 4 amp max. total load 1 amp max. per terminal Height: 3.75" Width: 5.50" Depth (Inches): 1.12" Accuracy: +/- 1°F