Valworx 560804C 膨胀阀-产品快照

产品介绍

Valworx 560804C 膨胀阀

Electric 3-Way Stainless L-Diverter Valve 1/2", 115-240V

Valworx

Series: 5608 , Valworx 560804C electric actuated 3-way L-port stainless steel ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. These FULL PORT valves can be used as either a diverter valve or selector valve. There is no flow shutoff position with this type valve. Actuator uses power-to-open (position 2) and power to close (position 1), stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a self-locking gear drive rotates the ball one quarter turn. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position. The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Anti-condensation heater will help protect actuator against damage caused by condensation. Two limit switches are provided to confirm valve position. Manual override can be used to operate valve during setup or with loss of electrical power. Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI with kit and vacuum service to 29 inch Hg. Advantages of electric actuated ball valves over other type valves may include: higher flow rates, higher pressures, higher temperatures, wider media compatibility, full port flow path, and reduced water hammer. Ball Valve Standard Features 1000 PSI working pressure (see P/T chart) Full port design 316 stainless steel body, ball and stem Four ball seat design allows for full pressure at any port PTFE ball seats for extend cycle life Triple PTFE/Viton stem seal design, live loaded and adjustable Valve direct mounts to actuator per ISO5211 Electric Actuator Standard Features Multi-voltage with auto-voltage sensing Electronic over torque protection Anti-condensation heater External LED diagnostic light Manual override Highly visual valve position indicator Electrical connections via DIN plug connectors (included) Auxiliary limit switches used to confirm valve positions Corrosion resistant polyamide IP67 weatherproof enclosure Options (see Accessories) BSR: Battery Spring Return - valve fails to safe position using an internal self-charging battery High Temp. Mounting Kit - extend working temperature up to 266 °F (130 °C) DIN 1/2" conduit plugs and prewired cables

Type 3-way L-Port Diverter or Selector Valve Voltage 85 to 240 Volts AC or DC (1 ph, 50/60 Hz) auto voltage sensing Current Rating 0.17A @ 115 VAC, 0.09A @ 240 VAC (full load amps) Cycle Time 10 seconds per 90° rotation (+/-10% no load) Pipe Size 1/2" NPT female Port Size Full Port, orifice 0.63 inches, Cv 4.5 Pressure (Max) 1000 PSI CWP non-shock (see P/T chart), 25 PSI steam with high temp. kit, vacuum service to 29" Hg Media Working Temperature 0-158 °F (-18 to 70 °C) media 0-266 °F (-18 to 130 °C) with optional high temp. kit Actuator Temperature Rating -4 to +158 °F (-20 to +70 °C) Valve Temperature Rating -4 to 325 °F (-20 to 163 °C) Valve Body 316 stainless steel Ball and Stem 316 stainless steel Ball Seats PTFE (Teflon) Stem Seals PTFE (Teflon)/ Viton Duty Cycle 75% Enclosure Anti-corrosive polyamide, SS fasteners Enclosure Rating IP67 weatherproof, UV protection Electrical Connections DIN plugs with cable entry (included), optional 1/2" conduit plugs Valve Position Confirmation 2 x SPST auxiliary limit switches rated 3A@125/250VAC, 30VDC resistive load Manual Override Hand knob Motor Protection Electronic over-torque with LED status light Anti-Condensation Heater 4 watts thermostatically controlled Approvals - Actuator CE mark, ISO5211 valve mount Approvals - Valve CE, Pressure Tested per API598, EN12266 Meets design MSS-SP-55, EN12516-1/3, ISO5211 flange Weight 6.1 lbs (2.8 kg)