| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，cs10@gchane.com , QQ1653501665
|
产品介绍
JAQUET D12P 速度传感器
Jaquet D12P - Differential Hall Effect Speed Sensor - Square Wave Signal Output from Push-Pull Stage w/M12x1 1.0" Thread
Jaquet
The Jaquet D12P series Differential Hall-Effect Speed sensors are suitable, in conjunction with a ferrous pole wheel, for generating square wave signals proportional to rotary speeds. They exhibit a dynamic function, whereby pulse generation down to 5 Hz is guaranteed. The sensor must be oriented with respect to the pole wheel as shown in the dimensional drawing (see spec sheet below). Features: Signal Output: Square Wave signal from push-pull output stage, DC-coupled to the supply, 30 mA max. load current Thread Length: 1.9" M12x1 thread 8-32 DCV Supply Voltage 15 mA (without load) maximum current consumption 5-20 kHz Frequency Range Housing: M12x1, tightening torque: max 12 Nm Connection: Cable with Connector: Cable: 3-wire, 3 X 0.21 mm2 (AWG24), 350 mm (13.75") length, stranded wires, PTFE isolation, green casing Connector: AMP 282105-1, 3 pins Operating Temperature: -104-257°F (-40-125°C) Protection: IP68 (Sensor) / IP67 (Cable) Insulation: housing and electronics galvanically isolated (Test: 500V, 50 Hz for 1 minute)
Manufacturer Jaquet Model Number D12P Spec Sheet Jaquet_D12P_Specs.pdf Sensor Type Digital Magnetic & Hall Effect Sensors Supply Voltage 8-32 DCV Mounting Thread M12x1 Thread Length 1.7"-2.0" Termination Connector Additional SKUs No
Home / Jaquet D12P - Differential Hall Effect Speed Sensor - Square Wave Signal Output from Push-Pull Stage w/M12x1 1.0" Thread
更多产品:
更多品牌:
