Gates 3VX475 Super HC Molded Notch Belt, 3VX Section, 3/8" Width, 21/64" Height, 47.5" Belt Outside Circumference 皮带-产品快照
- 品牌:
- GATES
- 型号:
- Gates 3VX475 Super HC Molded Notch Belt, 3VX Section, 3/8" Width, 21/64" Height, 47.5" Belt Outside Circumference
- 重量:
- 0.0681 kg
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
必迪艾(天津)轴承有限公司 | 022-25324166 | |
厦门南丽杰工业设备有限公司 | 0592-5685601 |
产品介绍
Gates 3VX475 Super HC Molded Notch Belt, 3VX Section, 3/8" Width, 21/64" Height, 47.5" Belt Outside Circumference 皮带
Gates 3VX475 Super HC Molded Notch Belt, 3VX Section, 3/8" Width, 21/64" Height, 47.5" Belt Outside Circumference
Gates
This Gates Super HC notched power transmission V-belt reduces bending stress as the belt wraps around small diameter pulleys. It is made of EPDM (ethylene propylene diene monomer) rubber for resistance to weathering, oils, water, and some solvents. Its cords are bonded to the body are strongly bonded to the body of the belt for equal load distribution and reducing bending stress without deterioration of the cord. Notches molded into the underside create the flexibility needed to fit smaller diameter sheaves while maintaining strength and traction. The belt's edge is machined for even sheave groove contact, resulting in less slip and wear. It has a working temperature range of -65 to +250 degrees F to protect the belt from cracking and meets RMA oil and heat resistance standards and static conductivity requirements. Super HC belts are part of Gates' V80 matching system, which guarantees that all belts of the same type and size will be more precisely matched than the Rubber Manufacturers Association (RMA) and International Standards Organization (ISO) standards require. The result is even load distribution on multi-belt drives and better wear. This V-belt is suitable for use in all industrial applications in which space, weight, and horsepower capacity are critical. V-belts, also called fan belts in automotive applications, link two or more rotating shafts to transmit power in a drive system. The trapezoidal shape of the belt's cross section wedges into the groove of a similarly shaped sheave or pulley to provide traction and alignment. This wedging action increases as the load increases, providing higher torque transmission and minimal slippage. V-belts are standard for belt-driven power transmission and can be used in single- or multi-belt systems for increased carrying power. They are found in drive systems in the automotive, agricultural, textile, printing, mining, and office equipment industries, among others. Gates manufactures power transmission and fluid transfer components and systems. The company, founded in 1917, is headquartered in Denver, CO. , EPDM for resistance to weathering, oils, water, and some solvents Cords bonded to the body for equal load distribution and reduced bending stress Notches molded into underside for the flexibility to fit smaller diameter sheaves Belt edge is machined for increased traction and reduced wear Working temperature range of -65 to +250 degrees F
Manufacturer: Gates Brand: Gates UPC: 072053266955 , Item Weight: 0.2 pounds Package Weight: 0.15 pounds Package Size: 10.4 x 0.5 x 0.5 inches Units in Package: 1
SHOP BELTS PAGE 24