Vero Technologies 10-2858-产品快照
- 品牌:
- Vero Technologies
- 型号:
- 10-2858
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，cs11@gchane.com , QQ1429311537
|
产品介绍
Vero Technologies 10-2858
10-2858, Double-Sided Stripboard Epoxy Glass 220 x 233.4 x 1.6mm DIN 41612 FR4
Vero Technologies
Double-Sided Microboards Non-PTH The component side of the card features a colander ground plane which assists glitch free high speed operation by dissipating switching spikes. This ground plane is solder resist coated and screen printed in yellow, except for the region of the 0V rails which align with the 0 Volt rails on the wiring side for simple through connection. DIN Type Stripboards Suitable for use with the KM6-II eurocard sub-rack systems The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end. The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered.Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard. Note Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card. ; Base Material Epoxy Glass Fabric Laminate; Number of Sides 2; Dimensions 220 x 233.4 x 1.6mm; Hole Diameter 1.02mm; Hole Pitch 2.54 x 2.54mm; Connection DIN 41612; FR Material Grade FR4; Length 233.4mm; Thickness 1.6mm; Width 220mm;
PCB Prototyping>Printed Circuit Boards - PCB>Stripboards
更多产品:
更多品牌:
