InnoDisk宜鼎 DECFA-04GD06SWADB 存储器-产品快照
- 品牌:
- InnoDisk
- 型号:
- DECFA-04GD06SWADB
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,cs11@gchane.com , QQ1429311537 |
产品介绍
InnoDisk宜鼎 DECFA-04GD06SWADB 存储器
InnoDisk 4 GB SSD, CFAST
InnoDisk
Innodisk 3SE Industrial SLC CFast Card (SATA III) The Innodisk CFast 3SE operates at SATA III 6.0 Gb/s, which offers data transfer rate of read up to 470MB/sec. and of sequential write up to 250MB/s. Compliant with CFast 2.0 standard, it is designed with 7+17 pin connector and is SATA compatible. Due to the idle power saving, it reduces 30% power consumption. CFast 3SE is featured as small form factor, and suitable for most industrial application. SLC High Endurance NAND (60K Program / Erase Cycles)High Speed up-to Read: 450 / Write: 250MB/sec (Sequential)Compliant with SATA I and SATA II SATA III interfaceWrite protection securityEnhanced power cycling managementIntelligent error recovery systemiSMART disk health monitoringFixed BOMOperating Temperature range : -40゚C to +85゚CCFast 3SE can work under harsh environment, and complies with ATA protocol. Without additional drives, the disk can be configured as a boot device or data storage device. CFast 3SE support hardware write protect to prevent modification of valuable data on a device. Besides, through Innodisk's enhanced power cycling technology and more capacitors, CFast 3SE prevents data loss caused by sudden power failure. By using Innodisk's iSMART, users can not only monitor the operation status of SSD, but also visualize Wear-Levelling status with graphics Solid State Drives ; Internal/External Internal; Form Factor CFAST; Capacity 4 GB; Interface SATA III; Architecture SLC; Connector Pins 7 + 17; Orientation Horizontal; Operating Voltage 3.3V; Length 36.4mm; Width 42.8mm; Height 3.6mm;
Computing & Peripherals>Data Storage & Memory>Solid State Drives - SSD