| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 宝帝流体控制系统（上海）有限公司 | ||
| 福州倍德福工业自动化设备有限公司 | 0591-83500620 | |
| 深圳市仕达威实业有限公司 | 400-800-8619 | 德国工业品一站式采购 |
| 夏罗登工业科技（上海）有限公司 | 4009660889 | |
| 青岛柯尔克流体控制系统有限公司 | 0532-68078849 |
产品介绍
BURKERT宝帝 228422 电磁阀
Burkert Solenoid Valve 228422, 230 V, 1in
Burkert
DS6281-EV 2/2 Solenoid Valve - Stainless Steel - ATEX A 2 way servo assisted solenoid valves suitable for use with neutral fluids such as compressed air and water. N/C (Normally Closed) and N/O (Normally Open) versions available with NBR (Nitrile Rubber) or FKM (Fluroelastomer) seals. Usable for a variety of applications including heating and refrigeration, water treatment, compressed air and vacuum systems. 0.1 - 4 second response time (dependant upon pressure)IP65 Rated (with cable protection)Stainless steel bodyQuiet operationWater hammer free designCompact installation lengthNPT / Rc connection ports0.2 - 16 Bar pressure rangeATEX approved Two Way Inert Gases and Fluid Valves Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required. ; Supply Voltage 230 V; Connection 1 in G; Connection Size 1in; Orifice Diameter 25mm; Body Material Stainless Steel; Maximum Working Pressure 16 bar; Operating Temperature Range -10 → +80 °C; Minimum Operating Temperature -10°C; Maximum Operating Temperature +80°C; Thread Standard or Connection Type G; Connection Gender Female; Series 6281 EV Standard; Flow Factor Kv 12m³/h; Hazardous Area Certification ATEX;
Solenoid Valves
更多产品:
更多品牌:
