Solartron Metrology 911001-RS 信号继电器-产品快照
- 品牌:
- Solartron Metrology
- 型号:
- 911001-RS
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
暂无展示,可咨询在线客服 | 400-811-6961 | 微信咨询,cs11@gchane.com , QQ1429311537 |
产品介绍
Solartron Metrology 911001-RS 信号继电器
Voltage to Current Signal Conditioning 0.5 → 750 mV/V Input, ±10 mA Output
Solartron Metrology
2 Channel Eurocard LVDT Oscillator/Demodulator Contains all the circuitry to drive 2 ac LVDTs10-turn potentiometer control of span and zeroJumper adjustment of drive and output signalsSuitable for all ac LVDTs, and most othersConnection via DIN 41612 ac edge connector Supply protection Reverse polarity protected Transducer sensitivity range 0.5 to 695mV/V in 9 coarse gain positions Gain control 460 to 1 switched, 3 to 1 adjustable Temp. Coefficient Zero; >0.01% fro/°C, Gain, better than 0.01% fro/°C Output impedance Dimensions ( L x H x D) (mm) 160 x 100 x 18 Operating Temp. (°C) 0 to +70 Transducer Drive 5 Vrms @ 5kHz (max.) rated @ 50 mA Zero Control ± 20% & ±100% Switched Output Voltage ±5V into 10kΩ, Linear over range to ±10V Output Ripple Output Filter Cut-off, -3dB @ 500Hz, second order Non-Linearity Supplied with full instructions. Linear Variable Differential Transformers (LVDT) These devices comprise a movable nickel iron core and three coils - one for energisation and two for pick-up. They need to be driven by a sine wave to produce an output amplitude and phase directly proportional to the position of the core with respect to the pick-up coils. A phase sensitive detector is required to demodulate the output signal. The main advantages of LVDTs are; No wear problems as with potentiometersInfinite resolution, high accuracy and linearityNo friction introduced into the measured systemAvailable in ranges from ±1mm to ±50mm Note RS LVDT's datasheet Stock No. 232-4049 is available on request. ; Input Type Voltage; Output Type Current; Signal Conditioner Type Voltage to Current; Input Range 0.5 → 750 mV/V; Output Range ±10 mA; Supply Voltage ±15 V dc; Sensor Compatibility LVDT; Minimum Operating Temperature 0°C; Maximum Operating Temperature +70°C; Operating Temperature Range 0 → +70 °C;
Automation & Control Gear>Control Relays>Signal Conditioning