Kubler 8.5882.1622.2004 编码器-产品快照

产品介绍

Kubler 8.5882.1622.2004 编码器

Kubler Absolute Encoder 6000rpm Hollow 5 → 30 V dc

Kubler

Rotary transducer 5882 absolute, multiturn, hollow shaft, 58 mm Multiturn rotary encoder in hollow shaft design (end-to-end hollow shaft) with multiturn level that works contact-free and new intelligent sensing technology (I-S-T)Designed with Integrative Technology®4 (programmable) outputsResolution up to 8192 (13 Bit) per revolution, 4096 (12 Bit) revolutions, corresponds to 25 BitThe following parameters can be programmed: code type, resolution per revolution, overall resolution, rotational direction (clockwise or counter clockwise), zero point, limit switchInstallation depth 40.5 mmProtection rating IP65Shock-resistant up to 250 gSize Ø 58 mm Range of functions with optional Ezturn configuration software (see accessories).Communication parameter settingConfiguration of gear factor by changing resolution per revolution, number of revolutions and overall resolutionProgramming of rotational direction and code patternConfiguration of preset/electronic zero pointConfiguration of diagnostics functionsConfiguration of outputs A1 to A4Limit switch values, max. 2Limit of max. number of bits for adjustment of controlsDiagnostics and information for set-up modeTerminal operation for direct commands using keyboardDiagnosis of connected transmitterAvailable languages: German, English and French Included in delivery of Ezturn configuration kitinterface convertersSub-D, 9-pole connection cable from interface converter RS 232 to RS 485 or RS 232 to RS 422 (can be selected using switch) to rotary encoderPower supply 90 Vac → 250 VacCD-ROM Mechanical characteristics   speed: max. 6000 min-1 Moment of inertia of rotor: approx. 6 x 10-6 kgm2 Starting torque: Weight: approx. 0.5 kg Protection rating according to EN 60 529: IP65 Working temperature range: -20 °C → +70 °C Operating temp. range: -20 °C → +80 °C Shaft: Stainless steel Shock resistance: 2500 m/s 2.6 ms   (in accordance with DIN-IEC 68-2-27) Electrical characteristic values   Interface type: Synchronous serial interface (SSI) Supply voltage (UB): 5 Vdc → 30 Vdc Output driver: RS 485 Power consumption 89 mA (type)   138 mA max. (without load) Permitted load/channel: max. ±20 mA Update rate max. 1600 / s SSI cycle rate min./max.: 100 kHz / 500 kHz Signal level: High: typ. 3.8 V   Low: typ. 1.3 V (load = 20 mA) Rise time tr: max. 100 ns (without cable) Fall time tf: max. 100 ns (without cable) Short-circuit proof outputs: Yes Polarity protection on UB: Yes Hardware inputs: For preset value and rotational direction Approvals CE in accordance with EN 50082-2, EN 50081-2, EN 55011 class B and EN 61000-4-8Behaviour against magnetic interference Kubler Push pull interface with inverted signalsShort circuit protectionAge and temperature compensation ; Encoder Technology Absolute; Maximum Revolutions 6000rpm; Output Signal Type SSI; Shaft Type Hollow; Supply Voltage 5 → 30 V dc; Resolution 25 bit; IP Rating IP65; Overall Height 43.2mm; Minimum Operating Temperature -20°C; Maximum Operating Temperature +70°C; Switching Frequency 100 → 500 kHz;

Rotary Encoders